ansible-collections/community.mysql
1
0
Fork 0
mirror of https://github.com/ansible-collections/community.mysql.git synced 2025-04-05 02:00:31 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

[PR #490/6970aef backport][stable-2] Integrations tests : Use containers (#519)

Browse source 
* Integrations tests : Use containers for more control and verify that versions match expectation (#490)

* Add healthcheck to MariaDB before starting the tests
This prevent the first test to fail because the db isn't ready yet.

* Add % instead of the default 'localhost' since we use remote connection

Previously, everything was on localhost. Now ansible-test is in a
venv and the db is in a container. The db see the IP address from the
podman host (10.88.0.2)

* Add mysql_client to the controller

* Prepare controller with Podman/Docker Network

We use the Podman/Docker network gateway address to communicate between
container. I haven't tested Docker. I would have preferred to use a pod
but only Podman support it and ansible-test only support the
--docker-network option.

* Generalize mysql and mariadb version based on container name

This way we can split db_engine and db_version and simplify tests.
Also this is mandatory to use the matrix.db_engine_version as the
image name for our services containers.

* Fix replication due to usage of gateway_addr instead of localhost

* Refactor setup_mysql into setup_controller

* Fix server_id in GHA

GHA lack a way to pass option to docker's command. Also server_id is
not read as a environment variable. So I'm forced to use a config file.

* Refactor test_mysql_user to work with other host than localhost

* Refactor way tests info are passed from sed to file with lookup

The idea is to avoid modifying test targets from the workflow to prevent
ansible-test to think every tests needs to be run.

* Refactor test to use the db_version from setup_controller

* Add temporary files to .gitignore

* Add back docker healthcheck on services

I saw in the GHA logs that it perform an healtcheck ! So I hope this
will work.

* Refactor the way server_id is set for replicas

The simple way is to add '--server-id 2' after the name of the image of
the container. But GHA doesn't let us do that. The idea of mount a file
from our repo doesn't work because the repo is check out later in the
workflow and I failed to find a pre-job hook. Then I realized that this
MySQL option is dynamic! So we will set that in the test target!

* Add IF NOT EXISTS to prevent misleading error on retry

* Cut python 3.11 not supported by ansible-test yet

* Add option to run only a single target

* Disable replication with channel tests entirely for MySQL 5.7

* Activate Mysql 8 and Mariadb into GitHub Action Workflow

* Document run_all_tests.py

* Fix replication settings

sh don't know 'echo -e', so we use bash instead.
Also, we need to wait for the container to be healthy before trying to
restart it. Otherwise that could corrupt it.

* Add more descriptive tests names

* Use mysql_host var name instead of gateway_addr in tests

* Refactor user@<gateway ip addr> into user@%

* Workaround for plugin role that fails with any MariaDB versions

* Ensure replicas are healthy before rebooting them

* Add a virtualenv for ansible-test used locally

* Cut column-statistics disabling

Thanks to our test-container, we now use the correspond mysql-client.
So to test mysql 5.7 we use mysql-client-5.7 and to test mysql 8 we
use mysql-client-8.

* Fix test matrix

Python version should be quoted, otherwise 3.10 become 3.1
We can skip 2.14 and devel with Python3.8
We can skip devel with Python 3.9
We can skip MariaDB 10.4 with mysql-client-10.6
Add tests for MariaDB 10.6, 10.7 and 10.8

* Fix queries for roles

* Add filter for issues resolved in newer version of mysqlclient

* Add names to tests

* Cut tests for incompatible MySQL 8 and pymysql 0.7.11

* Fix assertion for older mysqlclient than 2.0.1 with mysql (mariadb ok)

* Change docker-image workflow to work on all images using matrix

* Add support for version of mysqlclient

* Fix verify database version

Sometimes, version_full contains trailing information (-log). To prevent
issues it's best to concatenate major and minor version.

* Cut filter for tests now that the right connector is used

* Add clean up in "always" phase of the block

Because our tests use --retry-on-error, and the first thing the test
does is to try to create the database. We must cleanup otherwise if
there is a retry, it will throw a misleading "database already exists"
error.

* Disable tests using pymysql 1.0.2

Many tests are failing but this must be fixed in the plugins in a future
PR.

* Cut test MySQL 8 with incompatible pymysql 0.7.11

It fails to connect with error about cryptography unsupported

* Fix missing cffi package to connect to MySQL 8 using Python 3.9

* Split Docker image workflow to rebuild only changed Dockerfile

My goal is not to save the planet but to make it work. Currently
docker/setup-buildx-action@v2 often fails. You have to rerun the
workflow multiple times until it succeed. When you do that with the
matrix with 15 containers, you never get to the point where they all
built successfully. Having separate workflows makes rerun the failing
build easier.

* Add option to let containers alive at end of testing

* Migrate tests documentations in their own file

* Document usage of continue_on_errors

* Add support for systems with unsupported python set as default

* Add create podman network for system missing it.

We saw that on a Fedora 33 with Podman 3.3.1, an old system. I didn't
find in which release the default network changed and maybe it's
defined in the Linux distribution. So in doubt I always attempt to
create the network.

* Add full path to image to prevent podman asking which registry to use

* Add options to enforce recreate containers even if already exists

* Add deletion of anonymous volumes associated with the container

* Change shebang from python to python3 to avoid confusion with python2

This script is a python3 script.

* Add disk and RAM requirements

* Cut the 3 from python command to follow shebang recommendations

https://docs.ansible.com/ansible-core/devel/dev_guide/testing/sanity/shebang.html

* Reformat file path

Co-authored-by: Jorge Rodriguez (A.K.A. Tiriel) <jorge.rodriguez@futurice.com>

* Move utility task files in their own folder

* Add called workflow file in the GHA hooks

Without this, the containers are not rebuilt when you modify the file
built-docker-image.yml.

* Rollback to github.repository in container image name

This time I think I understood. We publish in the
github.repository_owner's namespace. In my case it's laurent-indermuehle
and in case of upstream it's ansible-collections. A proof of that:
https://github.com/orgs/ansible-collections/packages <- here there is
one attempt I did in february to push my branch to the upstream.
So, our tests containers will be visible to the whole community, not
just community.mysql.

---------

Co-authored-by: Jorge Rodriguez (A.K.A. Tiriel) <jorge.rodriguez@futurice.com>
(cherry picked from commit 6970aef8f6)

* Add changelog fragment

* Disable tests that doesn't work on stable-1

It's shameful to disable tests, but they didn't makes much sense
anyway.

* Fix error message being different on stable-1 than v3

* Disable tests against MariaDB 10.5 and 10.6

Does version have never been tested on stable-1 and many tests fails.
This commit is contained in:
Laurent Indermühle 2023-03-29 08:56:52 +02:00 • committed by GitHub
parent b02c5b411a
commit 530e6c3d9c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
122 changed files with 3786 additions and 2639 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

375
.github/workflows/ansible-test-plugins.yml vendored
View file

@ -1,3 +1,4 @@
---
name: Plugins CI
on:
push:
@ -14,10 +15,6 @@ on:
- cron: '0 6 * * *'
env:
mysql_version_file: "tests/integration/targets/setup_mysql/defaults/main.yml"
connector_version_file: "tests/integration/targets/setup_mysql/vars/main.yml"
jobs:
sanity:
name: "Sanity (Ansible: ${{ matrix.ansible }})"
@ -43,43 +40,312 @@ jobs:
strategy:
fail-fast: false
matrix:
db_engine_version:
- mysql_5.7.31
- mysql_8.0.22
ansible:
- stable-2.12
- stable-2.13
- stable-2.14
- devel
python:
- 3.6
- 3.8
- 3.9
connector:
- pymysql==0.7.10
- pymysql==0.9.3
- mysqlclient==2.0.1
exclude:
- db_engine_version: mysql_8.0.22
connector: pymysql==0.7.10
- python: 3.6
ansible: stable-2.12
- python: 3.6
ansible: stable-2.13
- python: 3.6
ansible: stable-2.14
- python: 3.6
ansible: devel
- python: 3.8
ansible: stable-2.13
- python: 3.8
ansible: stable-2.14
- python: 3.8
ansible: devel
- python: 3.9
ansible: stable-2.12
include:
# Before we can activate test with pymysql 1.0.2 we should debug the
# following plugins:
#
# mysql_query:
# test "Assert that create table IF NOT EXISTS is not changed with pymysql" failed
#
# mysql_replication:
# test "Assert that startreplica is not changed" failed
# ==================================================================
# mysql-client 5.7 + Python 3.8
# ==================================================================
- ansible: stable-2.12
db_engine_version: mysql:5.7.40
python: '3.8'
connector: pymysql==0.7.11
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my57-py38-pymysql0711:latest
- ansible: stable-2.12
db_engine_version: mysql:5.7.40
python: '3.8'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my57-py38-pymysql093:latest
- ansible: stable-2.12
db_engine_version: mysql:5.7.40
python: '3.8'
connector: mysqlclient==2.0.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my57-py38-mysqlclient201:latest
# ==================================================================
# mysql-client 8 + Python 3.8
# ==================================================================
- ansible: stable-2.12
db_engine_version: mysql:8.0.31
python: '3.8'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py38-pymysql093:latest
- ansible: stable-2.12
db_engine_version: mysql:8.0.31
python: '3.8'
connector: mysqlclient==2.0.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py38-mysqlclient201:latest
# ==================================================================
# mysql-client 8 + Python 3.9
# ==================================================================
- ansible: stable-2.13
db_engine_version: mysql:8.0.31
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py39-pymysql093:latest
- ansible: stable-2.13
db_engine_version: mysql:8.0.31
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py39-mysqlclient203:latest
- ansible: stable-2.14
db_engine_version: mysql:8.0.31
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py39-pymysql093:latest
- ansible: stable-2.14
db_engine_version: mysql:8.0.31
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py39-mysqlclient203:latest
# ==================================================================
# mysql-client 8 + Python 3.10
# ==================================================================
# - ansible: stable-2.13
# db_engine_version: mysql:8.0.31
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-pymysql102:latest
- ansible: stable-2.13
db_engine_version: mysql:8.0.31
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-mysqlclient211:latest
# - ansible: stable-2.14
# db_engine_version: mysql:8.0.31
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-pymysql102:latest
- ansible: stable-2.14
db_engine_version: mysql:8.0.31
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-mysqlclient211:latest
# - ansible: devel
# db_engine_version: mysql:8.0.31
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-pymysql102:latest
- ansible: devel
db_engine_version: mysql:8.0.31
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-my80-py310-mysqlclient211:latest
# ==================================================================
# mariadb-client 10.3 + Python 3.8
# ==================================================================
- ansible: stable-2.12
db_engine_version: mariadb:10.4.27
python: '3.8'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py38-pymysql093:latest
- ansible: stable-2.12
db_engine_version: mariadb:10.4.27
python: '3.8'
connector: mysqlclient==2.0.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py38-mysqlclient201:latest
- ansible: stable-2.12
db_engine_version: mariadb:10.5.18
python: '3.8'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py38-pymysql093:latest
- ansible: stable-2.12
db_engine_version: mariadb:10.5.18
python: '3.8'
connector: mysqlclient==2.0.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py38-mysqlclient201:latest
# ==================================================================
# mariadb-client 10.3 + Python 3.9
# ==================================================================
- ansible: stable-2.13
db_engine_version: mariadb:10.4.27
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-pymysql093:latest
- ansible: stable-2.13
db_engine_version: mariadb:10.4.27
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-mysqlclient203:latest
- ansible: stable-2.13
db_engine_version: mariadb:10.5.18
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-pymysql093:latest
- ansible: stable-2.13
db_engine_version: mariadb:10.5.18
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-mysqlclient203:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.4.27
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-pymysql093:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.4.27
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-mysqlclient203:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.5.18
python: '3.9'
connector: pymysql==0.9.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-pymysql093:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.5.18
python: '3.9'
connector: mysqlclient==2.0.3
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb103-py39-mysqlclient203:latest
# ==================================================================
# mariadb-client 10.6 + Python 3.10
# ==================================================================
# - ansible: stable-2.13
# db_engine_version: mariadb:10.5.18
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: stable-2.13
db_engine_version: mariadb:10.5.18
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
# - ansible: stable-2.13
# db_engine_version: mariadb:10.6.11
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: stable-2.13
db_engine_version: mariadb:10.6.11
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
# - ansible: stable-2.14
# db_engine_version: mariadb:10.5.18
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.5.18
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
# - ansible: stable-2.14
# db_engine_version: mariadb:10.6.11
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: stable-2.14
db_engine_version: mariadb:10.6.11
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
# - ansible: devel
# db_engine_version: mariadb:10.5.18
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: devel
db_engine_version: mariadb:10.5.18
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
# - ansible: devel
# db_engine_version: mariadb:10.6.11
# python: '3.10'
# connector: pymysql==1.0.2
# docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-pymysql102:latest
- ansible: devel
db_engine_version: mariadb:10.6.11
python: '3.10'
connector: mysqlclient==2.1.1
docker_image: ghcr.io/ansible-collections/community.mysql/test-container-mariadb106-py310-mysqlclient211:latest
services:
db_primary:
image: docker.io/library/${{ matrix.db_engine_version }}
env:
MARIADB_ROOT_PASSWORD: msandbox
MYSQL_ROOT_PASSWORD: msandbox
ports:
- 3307:3306
# We write our own health-cmd because the mariadb container does not
# provide a healthcheck
options: >-
--health-cmd "mysqladmin ping -P 3306 -pmsandbox |grep alive || exit 1"
--health-start-period 10s
--health-interval 10s
--health-timeout 5s
--health-retries 6
db_replica1:
image: docker.io/library/${{ matrix.db_engine_version }}
env:
MARIADB_ROOT_PASSWORD: msandbox
MYSQL_ROOT_PASSWORD: msandbox
ports:
- 3308:3306
options: >-
--health-cmd "mysqladmin ping -P 3306 -pmsandbox |grep alive || exit 1"
--health-start-period 10s
--health-interval 10s
--health-timeout 5s
--health-retries 6
db_replica2:
image: docker.io/library/${{ matrix.db_engine_version }}
env:
MARIADB_ROOT_PASSWORD: msandbox
MYSQL_ROOT_PASSWORD: msandbox
ports:
- 3309:3306
options: >-
--health-cmd "mysqladmin ping -P 3306 -pmsandbox |grep alive || exit 1"
--health-start-period 10s
--health-interval 10s
--health-timeout 5s
--health-retries 6
steps:
# No need to check for service health. GitHub Action took care of it.
- name: Restart MySQL server with settings for replication
run: |
docker exec ${{ job.services.db_primary.id }} bash -c 'echo -e [mysqld]\\nserver-id=1\\nlog-bin=/var/lib/mysql/primary-bin > /etc/mysql/conf.d/replication.cnf'
docker exec ${{ job.services.db_replica1.id }} bash -c 'echo -e [mysqld]\\nserver-id=2\\nlog-bin=/var/lib/mysql/replica1-bin > /etc/mysql/conf.d/replication.cnf'
docker exec ${{ job.services.db_replica2.id }} bash -c 'echo -e [mysqld]\\nserver-id=3\\nlog-bin=/var/lib/mysql/replica2-bin > /etc/mysql/conf.d/replication.cnf'
docker restart -t 30 ${{ job.services.db_primary.id }}
docker restart -t 30 ${{ job.services.db_replica1.id }}
docker restart -t 30 ${{ job.services.db_replica2.id }}
- name: Wait for the primary to be healthy
run: |
while ! /usr/bin/docker inspect --format="{{if .Config.Healthcheck}}{{print .State.Health.Status}}{{end}}" ${{ job.services.db_primary.id }} | grep healthy && [[ "$SECONDS" -lt 120 ]]; do sleep 1; done
- name: >-
Perform integration testing against
Ansible version ${{ matrix.ansible }}
@ -88,22 +354,17 @@ jobs:
with:
ansible-core-version: ${{ matrix.ansible }}
pre-test-cmd: >-
DB_ENGINE=$(echo '${{ matrix.db_engine_version }}' | awk -F_ '{print $1}');
DB_VERSION=$(echo '${{ matrix.db_engine_version }}' | awk -F_ '{print $2}');
DB_ENGINE_PRETTY=$([[ "${DB_ENGINE}" == 'mysql' ]] && echo 'MySQL' || echo 'MariaDB');
>&2 echo Matrix factor for the DB is ${{ matrix.db_engine_version }}...;
>&2 echo Setting ${DB_ENGINE_PRETTY} version to ${DB_VERSION}...;
sed -i -e "s/^${DB_ENGINE}_version:.*/${DB_ENGINE}_version: $DB_VERSION/g" '${{ env.mysql_version_file }}';
if [[ ${{ matrix.db_engine_version }} == mariadb* ]];
then
echo Set MariaDB install flag...; sed -i -e "s/^mariadb_install: false/mariadb_install: true/g" '${{ env.mysql_version_file }}';
echo Set MariaDB v10.8.3 URL sub dir...; sed -i -e "s/^mariadb_url_subdir:.*/mariadb_url_subdir: linux-systemd/g" '${{ env.connector_version_file }}';
fi;
>&2 echo Setting Connector version to ${{ matrix.connector }}...;
sed -i 's/^python_packages:.*/python_packages: [${{ matrix.connector }}]/' ${{ env.connector_version_file }}
echo Setting db_engine_version to "${{ matrix.db_engine_version }}"...;
echo -n "${{ matrix.db_engine_version }}" > tests/integration/db_engine_version;
echo Setting Connector version to "${{ matrix.connector }}"...;
echo -n "${{ matrix.connector }}" > tests/integration/connector;
echo Setting Python version to "${{ matrix.python }}"...;
echo -n "${{ matrix.python }}" > tests/integration/python;
echo Setting Ansible version to "${{ matrix.ansible }}"...;
echo -n "${{ matrix.ansible }}" > tests/integration/ansible
docker-image: ${{ matrix.docker_image }}
target-python-version: ${{ matrix.python }}
testing-type: integration
pull-request-change-detection: true
units:
runs-on: ubuntu-20.04
@ -122,13 +383,13 @@ jobs:
- 3.8
- 3.9
exclude:
- python: 3.8
- python: '3.8'
ansible: stable-2.13
- python: 3.8
- python: '3.8'
ansible: stable-2.14
- python: 3.8
- python: '3.8'
ansible: devel
- python: 3.9
- python: '3.9'
ansible: stable-2.12
steps:

1
.github/workflows/ansible-test-roles.yml vendored
View file

@ -1,3 +1,4 @@
---
name: Roles CI
on:
push:

67
.github/workflows/build-docker-image.yml vendored Normal file
View file

@ -0,0 +1,67 @@
---
name: Build Docker Image for ansible-test
on:
workflow_call:
inputs:
registry:
required: true
type: string
image_name:
required: true
type: string
context:
required: true
type: string
jobs:
build:
runs-on: ubuntu-latest
permissions:
contents: read
packages: write
steps:
# Requirement to use 'context' in docker/build-push-action@v3
- name: Checkout repository
uses: actions/checkout@v3
# https://github.com/docker/login-action
- name: Log into registry ${{ inputs.registry }}
uses: docker/login-action@v2
with:
registry: ${{ inputs.registry }}
username: ${{ github.actor }}
password: ${{ secrets.GITHUB_TOKEN }}
# https://github.com/docker/metadata-action
- name: Extract Docker metadata (tags, labels)
id: meta
uses: docker/metadata-action@v4
with:
images:
"${{ inputs.registry }}\
/${{ github.repository }}\
/${{ inputs.image_name }}"
tags: latest
# Setting up Docker Buildx with docker-container driver is required
# at the moment to be able to use a subdirectory with Git context
#
# https://github.com/docker/setup-buildx-action
- name: Set up Docker Buildx
uses: docker/setup-buildx-action@v2
# https://github.com/docker/build-push-action
- name: Build and push Docker image with Buildx
id: build-and-push
uses: docker/build-push-action@v3
with:
context: ${{ inputs.context }}
push: true
tags: ${{ steps.meta.outputs.tags }}
labels: ${{ steps.meta.outputs.labels }}
cache-from: type=gha
cache-to: type=gha,mode=max

19
.github/workflows/docker-image-mariadb103-py38-mysqlclient201.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb103-py38-mysqlclient201
on:
push:
paths:
- 'test-containers/mariadb103-py38-mysqlclient201/**'
- '.github/workflows/docker-image-mariadb103-py38-mysqlclient201.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb103-py38-mysqlclient201
context: test-containers/mariadb103-py38-mysqlclient201

19
.github/workflows/docker-image-mariadb103-py38-pymysql093.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb103-py38-pymysql093
on:
push:
paths:
- 'test-containers/mariadb103-py38-pymysql093/**'
- '.github/workflows/docker-image-mariadb103-py38-pymysql093.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb103-py38-pymysql093
context: test-containers/mariadb103-py38-pymysql093

19
.github/workflows/docker-image-mariadb103-py39-mysqlclient203.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb103-py39-mysqlclient203
on:
push:
paths:
- 'test-containers/mariadb103-py39-mysqlclient203/**'
- '.github/workflows/docker-image-mariadb103-py39-mysqlclient203.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb103-py39-mysqlclient203
context: test-containers/mariadb103-py39-mysqlclient203

19
.github/workflows/docker-image-mariadb103-py39-pymysql093.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb103-py39-pymysql093
on:
push:
paths:
- 'test-containers/mariadb103-py39-pymysql093/**'
- '.github/workflows/docker-image-mariadb103-py39-pymysql093.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb103-py39-pymysql093
context: test-containers/mariadb103-py39-pymysql093

19
.github/workflows/docker-image-mariadb106-py310-mysqlclient211.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb106-py310-mysqlclient211
on:
push:
paths:
- 'test-containers/mariadb106-py310-mysqlclient211/**'
- '.github/workflows/docker-image-mariadb106-py310-mysqlclient211.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb106-py310-mysqlclient211
context: test-containers/mariadb106-py310-mysqlclient211

19
.github/workflows/docker-image-mariadb106-py310-pymysql102.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI mariadb106-py310-pymysql102
on:
push:
paths:
- 'test-containers/mariadb106-py310-pymysql102/**'
- '.github/workflows/docker-image-mariadb106-py310-pymysql102.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-mariadb106-py310-pymysql102
context: test-containers/mariadb106-py310-pymysql102

19
.github/workflows/docker-image-my57-py38-mysqlclient201.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my57-py38-mysqlclient201
on:
push:
paths:
- 'test-containers/my57-py38-mysqlclient201/**'
- '.github/workflows/docker-image-my57-py38-mysqlclient201.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my57-py38-mysqlclient201
context: test-containers/my57-py38-mysqlclient201

19
.github/workflows/docker-image-my57-py38-pymysql0711.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my57-py38-pymysql0711
on:
push:
paths:
- 'test-containers/my57-py38-pymysql0711/**'
- '.github/workflows/docker-image-my57-py38-pymysql0711.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my57-py38-pymysql0711
context: test-containers/my57-py38-pymysql0711

19
.github/workflows/docker-image-my57-py38-pymysql093.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my57-py38-pymysql093
on:
push:
paths:
- 'test-containers/my57-py38-pymysql093/**'
- '.github/workflows/docker-image-my57-py38-pymysql093.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my57-py38-pymysql093
context: test-containers/my57-py38-pymysql093

19
.github/workflows/docker-image-my80-py310-mysqlclient211.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py310-mysqlclient211
on:
push:
paths:
- 'test-containers/my80-py310-mysqlclient211/**'
- '.github/workflows/docker-image-my80-py310-mysqlclient211.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py310-mysqlclient211
context: test-containers/my80-py310-mysqlclient211

19
.github/workflows/docker-image-my80-py310-pymysql102.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py310-pymysql102
on:
push:
paths:
- 'test-containers/my80-py310-pymysql102/**'
- '.github/workflows/docker-image-my80-py310-pymysql102.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py310-pymysql102
context: test-containers/my80-py310-pymysql102

19
.github/workflows/docker-image-my80-py38-mysqlclient201.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py38-mysqlclient201
on:
push:
paths:
- 'test-containers/my80-py38-mysqlclient201/**'
- '.github/workflows/docker-image-my80-py38-mysqlclient201.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py38-mysqlclient201
context: test-containers/my80-py38-mysqlclient201

19
.github/workflows/docker-image-my80-py38-pymysql093.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py38-pymysql093
on:
push:
paths:
- 'test-containers/my80-py38-pymysql093/**'
- '.github/workflows/docker-image-my80-py38-pymysql093.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py38-pymysql093
context: test-containers/my80-py38-pymysql093

19
.github/workflows/docker-image-my80-py39-mysqlclient203.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py39-mysqlclient203
on:
push:
paths:
- 'test-containers/my80-py39-mysqlclient203/**'
- '.github/workflows/docker-image-my80-py39-mysqlclient203.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py39-mysqlclient203
context: test-containers/my80-py39-mysqlclient203

19
.github/workflows/docker-image-my80-py39-pymysql093.yml vendored Normal file
View file

@ -0,0 +1,19 @@
---
name: Docker Image CI my80-py39-pymysql093
on:
push:
paths:
- 'test-containers/my80-py39-pymysql093/*'
- '.github/workflows/docker-image-my80-py39-pymysql093.yml'
- '.github/workflows/build-docker-image.yml'
jobs:
call-workflow-passing-data:
uses: ./.github/workflows/build-docker-image.yml
secrets: inherit
with:
registry: ghcr.io
image_name: test-container-my80-py39-pymysql093
context: test-containers/my80-py39-pymysql093

1
.gitignore vendored
View file

@ -1,4 +1,5 @@
/tests/output/
/tests/integration/inventory
/changelogs/.plugin-cache.yaml
*.swp

80
Makefile Normal file
View file

@ -0,0 +1,80 @@
SHELL := /bin/bash
# To tell ansible-test and Make to not kill the containers on failure or
# end of tests. Disabled by default.
ifdef keep_containers_alive
_keep_containers_alive = --docker-terminate never
endif
# This match what GitHub Action will do. Disabled by default.
ifdef continue_on_errors
_continue_on_errors = --retry-on-error --continue-on-error
endif
.PHONY: test-integration
test-integration:
echo -n $(db_engine_version) > tests/integration/db_engine_version
echo -n $(connector) > tests/integration/connector
echo -n $(python) > tests/integration/python
echo -n $(ansible) > tests/integration/ansible
# Create podman network for systems missing it. Error can be ignored
podman network create podman || true
podman run \
--detach \
--replace \
--name primary \
--env MARIADB_ROOT_PASSWORD=msandbox \
--env MYSQL_ROOT_PASSWORD=msandbox \
--network podman \
--publish 3307:3306 \
--health-cmd 'mysqladmin ping -P 3306 -pmsandbox | grep alive || exit 1' \
docker.io/library/$(db_engine_version) \
mysqld
podman run \
--detach \
--replace \
--name replica1 \
--env MARIADB_ROOT_PASSWORD=msandbox \
--env MYSQL_ROOT_PASSWORD=msandbox \
--network podman \
--publish 3308:3306 \
--health-cmd 'mysqladmin ping -P 3306 -pmsandbox | grep alive || exit 1' \
docker.io/library/$(db_engine_version) \
mysqld
podman run \
--detach \
--replace \
--name replica2 \
--env MARIADB_ROOT_PASSWORD=msandbox \
--env MYSQL_ROOT_PASSWORD=msandbox \
--network podman \
--publish 3309:3306 \
--health-cmd 'mysqladmin ping -P 3306 -pmsandbox | grep alive || exit 1' \
docker.io/library/$(db_engine_version) \
mysqld
# Setup replication and restart containers
podman exec primary bash -c 'echo -e [mysqld]\\nserver-id=1\\nlog-bin=/var/lib/mysql/primary-bin > /etc/mysql/conf.d/replication.cnf'
podman exec replica1 bash -c 'echo -e [mysqld]\\nserver-id=2\\nlog-bin=/var/lib/mysql/replica1-bin > /etc/mysql/conf.d/replication.cnf'
podman exec replica2 bash -c 'echo -e [mysqld]\\nserver-id=3\\nlog-bin=/var/lib/mysql/replica2-bin > /etc/mysql/conf.d/replication.cnf'
# Don't restart a container unless it is healthy
while ! podman healthcheck run primary && [[ "$$SECONDS" -lt 120 ]]; do sleep 1; done
podman restart -t 30 primary
while ! podman healthcheck run replica1 && [[ "$$SECONDS" -lt 120 ]]; do sleep 1; done
podman restart -t 30 replica1
while ! podman healthcheck run replica2 && [[ "$$SECONDS" -lt 120 ]]; do sleep 1; done
podman restart -t 30 replica2
while ! podman healthcheck run primary && [[ "$$SECONDS" -lt 120 ]]; do sleep 1; done
mkdir -p .venv/$(ansible)
python$(local_python_version) -m venv .venv/$(ansible)
source .venv/$(ansible)/bin/activate
python$(local_python_version) -m ensurepip
python$(local_python_version) -m pip install --disable-pip-version-check https://github.com/ansible/ansible/archive/$(ansible).tar.gz
-set -x; ansible-test integration $(target) -v --color --coverage --diff --docker $(docker_image) --docker-network podman $(_continue_on_errors) $(_keep_containers_alive) --python $(python); set +x
rm tests/integration/db_engine_version
rm tests/integration/connector
rm tests/integration/python
rm tests/integration/ansible
ifndef keep_containers_alive
podman stop --time 0 --ignore primary replica1 replica2
podman rm --ignore --volumes primary replica1 replica2
endif

21
README.md
View file

@ -63,23 +63,32 @@ Every voice is important and every idea is valuable. If you have something on yo
### ansible-core
- 2.11
- 2.12
- 2.13
- 2.14
- current development version
### Databases
- mysql 5.7.31
- mysql 8.0.22
- mariadb 10.3.34 (only collection version >= 3)
- mariadb 10.8.3 (only collection version >= 3)
For MariaDB, only Long Term releases are tested.
- mysql 5.7.40
- mysql 8.0.31
- mariadb:10.3.34 (only collection version <= 3.5.1)
- mariadb:10.4.24 (only collection version >= 3.5.2)
- mariadb:10.5.18 (only collection version >= 3.5.2)
- mariadb:10.6.11 (only collection version >= 3.5.2)
- mariadb:10.11.?? (waiting for release)
### Database connectors
- pymysql 0.7.10
- pymysql 0.7.11 (Only tested with MySQL 5.7)
- pymysql 0.9.3
- pymysql 1.0.2 (only collection version >= ???) !!! Unsuported until future release !!!
- mysqlclient 2.0.1
- mysqlclient 2.0.3 (only collection version >= 3.5.2)
- mysqlclient 2.1.1 (only collection version >= 3.5.2)
## External requirements

87
TESTING.md Normal file
View file

@ -0,0 +1,87 @@
# Tests
This collection uses GitHub Actions to run ansible-test to validate its content. Three type of tests are used: Sanity, Integration and Units.
The tests covers the code for plugins and roles (no role available yet, but tests are ready) and can be found here:
- Plugins: *.github/workflows/ansible-test-plugins.yml*
- Roles: *.github/workflows/ansible-test-roles.yml* (unused yet)
Everytime you push on your fork or you create a pull request, both workflows runs. You can see the output on the "Actions" tab.
## Integration tests
You can use GitHub to run ansible-test either on the community repo or your fork. But sometimes you want to quickly test a single version or a single target. To do that, you can use the Makefile present at the root of this repository.
For now, the makefile only supports Podman.
### Requirements
- python >= 3.8 and <= 3.10
- make
- Minimum 15GB of free space on the device storing containers images and volumes. You can use this command to check: `podman system info --format='{{.Store.GraphRoot}}'|xargs findmnt --noheadings --nofsroot --output SOURCE --target|xargs df -h --output=size,used,avail,pcent,target`
- Minimum 2GB of RAM
### Makefile options
The Makefile accept the following options:
- **local_python_version**: This option can be omitted if your system has a version supported by Ansible. You can check with `python -V`.
- **ansible**: Mandatory version of ansible to install in a venv to run ansible-test.
- **docker_image**:
The container image to use to run our tests. Those images Dockerfile are in https://github.com/community.mysql/test-containers and then pushed to quay.io: E.G.:
`quay.io/mws/community-mysql-test-containers-my57-py38-mysqlclient201-pymysql0711:latest`. Look in the link above for a complete list of available containers. You can also look into `.github/workflows/ansible-test-plugins.yml`
Unfortunatly you must provide the right container_image yourself. And you still need to provides db_engine_version, python, etc... because ansible-test won't do black magic to try to detect what we expect. Explicit is better than implicit anyway.
To minimise the amount of images, pymysql 0.7.11 and mysqlclient are shipped together.
- **db_engine_version**: The name of the container to use for the service containers that will host a primary database and two replicas. Either MYSQL or MariaDB. Use ':' as a separator. Do not use short version, like mysql:8 for instance. Our tests expect a full version to filter tests precisely. For instance: `when: db_version is version ('8.0.22', '>')`.
- **connector**: The name of the python package of the connector along with its version number. Use '==' as a separator.
- **python**: The python version to use in the controller.
- **target** : If omitted, all test targets will run. But you can limit the tests to a single target to speed up your tests.
- **keep_containers_alive**: This option keeps all tree databases containers and the ansible-test container alive at the end of tests or in case of failure. This is useful to enter one of the containers with `podman exec -it <container-name> bash` for debugging. Rerunning the
test will recreate those containers.
- **continue_on_errors**: Tells ansible-test to retry on errors and also continue on errors. This is the way the GitHub Action's workflow runs the tests. If you develop a new target, this option can be used to validate that your tests cleanup everything so a new run can restart without errors like "Failed to create database x because it already exists".
Examples:
```sh
# Run all targets
make ansible="stable-2.12" db_engine_version="mysql:5.7.40" python="3.8" connector="pymysql==0.7.11" docker_image="ghcr.io/community.mysql/test-container-my57-py38-pymysql0711:latest"
# A single target
make ansible="stable-2.14" db_engine_version="mysql:5.7.40" python="3.8" connector="pymysql==0.7.11" docker_image="ghcr.io/community.mysql/test-container-my57-py38-pymysql0711:latest" target="test_mysql_db"
# Keep databases and ansible tests containers alives
# A single target and continue on errors
make ansible="stable-2.14" db_engine_version="mysql:8.0.31" python="3.9" connector="mysqlclient==2.0.3" docker_image="ghcr.io/community.mysql/test-container-my80-py39-mysqlclient203:latest" target="test_mysql_db" keep_containers_alive=1 continue_on_errors=1
# If your system has an usupported version of Python:
make local_python_version="3.8" ansible="stable-2.14" db_engine_version="mariadb:10.6.11" python="3.9" connector="pymysql==0.9.3" docker_image="ghcr.io/community.mysql/test-container-mariadb103-py39-pymysql093:latest"
```
### Run all tests
GitHub Action offer a test matrix that run every combination of Python, MySQL, MariaDB and Connector against each other. To reproduce this, this repo provides a script called *run_all_tests.py*.
Examples:
```sh
python run_all_tests.py
```
### Add a new Python, Connector or Database version
1. Add a workflow in [.github/workflows/](.github/workflows)
1. Add a new folder in [test-containers](test-containers) containing a new Dockerfile. Your container must contains 3 things:
- The python interpreter
- The python package to connect to the database (pymysql, mysqlclient, ...)
- A mysql client to query the database before to prepare tests before our tests starts. This client must provide both `mysql` and `mysqldump` commands.
1. Add your version in *.github/workflows/ansible-test-plugins.yml*
After pushing the commit to the remote, the container will be build and published on ghcr.io. Have a look in the "Action" tab to see if it worked. In case of error `failed to copy: io: read/write on closed pipe` re-run the workflow, this append unfortunately a lot.
To see the docker image produced, go to the main GitHub page of your fork or community.mysql (depending were you pushed) and look for the link "Packages" on the right hand side of the page. This page indicate a "Published x days ago" that is updated infrequently. To see the last time the container has been updated you must click on its title and look in the right hands side bellow the title "Last published".

6
changelogs/fragments/490_refactor_integration_tests.yml Normal file
View file

@ -0,0 +1,6 @@
---
minor_changes:
- Integration tests - Add more versions of MariaDB
- Integration tests - Carefully verify every component of the tests in the new target 'setup_controller' to ensure expected versions are correct Python, Ansible, connector and MySQL/MariaDB.
- Integration tests - Add tools to test locally the same as on GHA by using same containers and virtualenv. Custom test containers are published in ghcr.io by this repo's workflows. MySQL/MariaDB are official Docker Hub images.
- Integration tests - New name for many tasks to makes it easier to find failing tests. Rename duplicates. Add name for tasks which doesn't had one, refactor some tests files to better group tests by subject, ...

3
changelogs/fragments/backport-stable-2-pr490.yml Normal file
View file

@ -0,0 +1,3 @@
---
trivial:
- Integration tests - Backport PR490

86
run_all_tests.py Executable file
View file

@ -0,0 +1,86 @@
#!/usr/bin/env python
import yaml
import os
github_workflow_file = '.github/workflows/ansible-test-plugins.yml'
def read_github_workflow_file():
with open(github_workflow_file, 'r') as gh_file:
try:
return yaml.safe_load(gh_file)
except yaml.YAMLError as exc:
print(exc)
def extract_value(target, dict_yaml):
for key, value in dict_yaml.items():
if key == target:
return value
def extract_matrix(workflow_yaml):
jobs = extract_value('jobs', workflow_yaml)
integration = extract_value('integration', jobs)
strategy = extract_value('strategy', integration)
matrix = extract_value('matrix', strategy)
return matrix
# def is_exclude(exclude_list, test_suite):
# test_is_excluded = False
# for excl in exclude_list:
# match = 0
# if 'ansible' in excl:
# if excl.get('ansible') == test_suite[0]:
# match += 1
# if 'db_engine_version' in excl:
# if excl.get('db_engine_version') == test_suite[1]:
# match += 1
# if 'python' in excl:
# if excl.get('python') == test_suite[2]:
# match += 1
# if 'connector' in excl:
# if excl.get('connector') == test_suite[3]:
# match += 1
# if match > 1:
# test_is_excluded = True
# return test_is_excluded
def main():
workflow_yaml = read_github_workflow_file()
tests_matrix_yaml = extract_matrix(workflow_yaml)
# matrix = []
# exclude_list = tests_matrix_yaml.get('exclude')
# for ansible in tests_matrix_yaml.get('ansible'):
# for db_engine in tests_matrix_yaml.get('db_engine_version'):
# for python in tests_matrix_yaml.get('python'):
# for connector in tests_matrix_yaml.get('connector'):
# if not is_exclude(exclude_list, (ansible, db_engine, python, connector)):
# matrix.append((ansible, db_engine, python, connector))
for tests in tests_matrix_yaml.get('include'):
a = tests.get('ansible')
d = tests.get('db_engine_version')
p = tests.get('python')
c = tests.get('connector')
i = tests.get('docker_image')
make_cmd = f'make ansible="{a}" db_engine_version="{d}" python="{p}" connector="{c}" docker_image="{i}" test-integration'
print(f'Run tests for: Ansible: {a}, DB: {d}, Python: {p}, Connector: {c}, Docker image: {i}')
os.system(make_cmd)
# TODO, allow for CTRL+C to break the loop more easily
# TODO, store the failures from this iteration
# TODO, display a summary of failures from every iterations
if __name__ == '__main__':
main()

21
test-containers/mariadb103-py38-mysqlclient201/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mariadb-client-10.3
# iproute2 # To grab docker network gateway address
# python3.8-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
python3.8-dev \
mariadb-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.0.1
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/mariadb103-py38-pymysql093/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mariadb-client-10.3
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
mariadb-client \
iproute2
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir pymysql==0.9.3
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/mariadb103-py39-mysqlclient203/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mariadb-client-10.3
# iproute2 # To grab docker network gateway address
# python3.9-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.9 \
python3.9-dev \
mariadb-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.9 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.0.3
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/mariadb103-py39-pymysql093/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mariadb-client-10.3
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.9 \
mariadb-client \
iproute2
RUN python3.9 -m pip install --disable-pip-version-check --no-cache-dir pymysql==0.9.3
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/mariadb106-py310-mysqlclient211/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2204-test-container:main
# ubuntu2204 comes with mariadb-client-10.6
# iproute2 # To grab docker network gateway address
# python3.10-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.10 \
python3.10-dev \
mariadb-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.10 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.1.1
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/mariadb106-py310-pymysql102/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu2204-test-container:main
# ubuntu2204 comes with mariadb-client-10.6
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.10 \
mariadb-client \
iproute2
RUN python3.10 -m pip install --disable-pip-version-check --no-cache-dir pymysql==1.0.2
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/my57-py38-mysqlclient201/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu1804-test-container:main
# ubuntu1804 comes with mysql-client-5.7
# iproute2 # To grab docker network gateway address
# python3.8-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
python3.8-dev \
mysql-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.0.1
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/my57-py38-pymysql0711/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu1804-test-container:main
# ubuntu1804 comes with mysql-client-5.7
# iproute2 # To grab docker network gateway address
# python3.8-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
python3.8-dev \
mysql-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir pymysql==0.7.11
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/my57-py38-pymysql093/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu1804-test-container:main
# ubuntu1804 comes with mysql-client-5.7
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
mysql-client \
iproute2
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir pymysql==0.9.3
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/my80-py310-mysqlclient211/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2204-test-container:main
# ubuntu2204 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
# python3.10-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.10 \
python3.10-dev \
mysql-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.10 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.1.1
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/my80-py310-pymysql102/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu2204-test-container:main
# ubuntu2204 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.10 \
mysql-client \
iproute2
RUN python3.10 -m pip install --disable-pip-version-check --no-cache-dir pymysql==1.0.2
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/my80-py38-mysqlclient201/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
# python3.8-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
python3.8-dev \
mysql-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.0.1
ENV container=docker
CMD ["/sbin/init"]

15
test-containers/my80-py38-pymysql093/Dockerfile Normal file
View file

@ -0,0 +1,15 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.8 \
mysql-client \
iproute2
RUN python3.8 -m pip install --disable-pip-version-check --no-cache-dir pymysql==0.9.3
ENV container=docker
CMD ["/sbin/init"]

21
test-containers/my80-py39-mysqlclient203/Dockerfile Normal file
View file

@ -0,0 +1,21 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
# python3.9-dev # Reqs for mysqlclient
# default-libmysqlclient-dev # Reqs for mysqlclient
# build-essential # Reqs for mysqlclient
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.9 \
python3.9-dev \
mysql-client \
iproute2 \
default-libmysqlclient-dev \
build-essential
RUN python3.9 -m pip install --disable-pip-version-check --no-cache-dir mysqlclient==2.0.3
ENV container=docker
CMD ["/sbin/init"]

16
test-containers/my80-py39-pymysql093/Dockerfile Normal file
View file

@ -0,0 +1,16 @@
FROM quay.io/ansible/ubuntu2004-test-container:main
# ubuntu2004 comes with mysql-client-8
# iproute2 # To grab docker network gateway address
RUN apt-get update -y && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade -y --no-install-recommends && \
DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
python3.9 \
mysql-client \
iproute2
# cffi # To connect to MySQL 8 with Python3.9 and PyMySQL
RUN python3.9 -m pip install --disable-pip-version-check --no-cache-dir cffi pymysql==0.9.3
ENV container=docker
CMD ["/sbin/init"]

2
tests/integration/old_mariadb_replication/defaults/main.yml
View file

@ -1,3 +1,5 @@
---
mysql_host: "{{ gateway_addr }}"
master_port: 3306
standby_port: 3307
test_db: test_db

36
tests/integration/old_mariadb_replication/tasks/mariadb_master_use_gtid.yml
View file

@ -11,7 +11,7 @@
# Auxiliary step:
- name: Get master status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: getmaster
register: primary_status
@ -19,10 +19,10 @@
# Set master_use_gtid disabled:
- name: Run replication
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: changemaster
master_host: 127.0.0.1
master_host: '{{ mysql_host }}'
master_port: "{{ primary_db.port }}"
master_user: "{{ replication_user }}"
master_password: "{{ replication_pass }}"
@ -38,13 +38,13 @@
# Start standby for further tests:
- name: Start standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: startslave
- name: Get standby status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: getslave
register: slave_status
@ -56,7 +56,7 @@
# Stop standby for further tests:
- name: Stop standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave
@ -67,7 +67,7 @@
# Auxiliary step:
- name: Get master status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: getmaster
register: primary_status
@ -75,10 +75,10 @@
# Set master_use_gtid current_pos:
- name: Run replication
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: changemaster
master_host: 127.0.0.1
master_host: '{{ mysql_host }}'
master_port: "{{ primary_db.port }}"
master_user: "{{ replication_user }}"
master_password: "{{ replication_pass }}"
@ -94,13 +94,13 @@
# Start standby for further tests:
- name: Start standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: startslave
- name: Get standby status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: getslave
register: slave_status
@ -112,7 +112,7 @@
# Stop standby for further tests:
- name: Stop standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave
@ -123,7 +123,7 @@
# Auxiliary step:
- name: Get master status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: getmaster
register: primary_status
@ -131,10 +131,10 @@
# Set master_use_gtid slave_pos:
- name: Run replication
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: changemaster
master_host: 127.0.0.1
master_host: '{{ mysql_host }}'
master_port: "{{ primary_db.port }}"
master_user: "{{ replication_user }}"
master_password: "{{ replication_pass }}"
@ -150,13 +150,13 @@
# Start standby for further tests:
- name: Start standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: startslave
- name: Get standby status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: getslave
register: slave_status
@ -168,6 +168,6 @@
# Stop standby for further tests:
- name: Stop standby
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave

22
tests/integration/old_mariadb_replication/tasks/mariadb_replication_connection_name.yml
View file

@ -4,20 +4,20 @@
# Needs for further tests:
- name: Stop slave
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave
- name: Reset slave all
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: resetslaveall
# Get master log pos:
- name: Get master status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: getmaster
register: primary_status
@ -25,10 +25,10 @@
# Test changemaster mode:
- name: Run replication with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: changemaster
master_host: 127.0.0.1
master_host: '{{ mysql_host }}'
master_port: "{{ primary_db.port }}"
master_user: "{{ replication_user }}"
master_password: "{{ replication_pass }}"
@ -45,7 +45,7 @@
# Test startslave mode:
- name: Start slave with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: startslave
connection_name: "{{ conn_name }}"
@ -59,7 +59,7 @@
# Test getslave mode:
- name: Get standby statu with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: getslave
connection_name: "{{ conn_name }}"
@ -68,7 +68,7 @@
- assert:
that:
- slave_status.Is_Slave == true
- slave_status.Master_Host == '127.0.0.1'
- slave_status.Master_Host == ''{{ mysql_host }}''
- slave_status.Exec_Master_Log_Pos == primary_status.Position
- slave_status.Master_Port == {{ primary_db.port }}
- slave_status.Last_IO_Errno == 0
@ -78,7 +78,7 @@
# Test stopslave mode:
- name: Stop slave with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave
connection_name: "{{ conn_name }}"
@ -92,7 +92,7 @@
# Test reset
- name: Reset slave with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: resetslave
connection_name: "{{ conn_name }}"
@ -106,7 +106,7 @@
# Test reset all
- name: Reset slave all with connection_name
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: resetslaveall
connection_name: "{{ conn_name }}"

20
tests/integration/old_mariadb_replication/tasks/mariadb_replication_initial.yml
View file

@ -3,11 +3,11 @@
# Preparation:
- name: Create user for replication
shell: "echo \"GRANT REPLICATION SLAVE ON *.* TO '{{ replication_user }}'@'localhost' IDENTIFIED BY '{{ replication_pass }}'; FLUSH PRIVILEGES;\" | mysql -P {{ primary_db.port }} -h 127.0.0.1"
shell: "echo \"GRANT REPLICATION SLAVE ON *.* TO '{{ replication_user }}'@'localhost' IDENTIFIED BY '{{ replication_pass }}'; FLUSH PRIVILEGES;\" | mysql -P {{ primary_db.port }} -h '{{ mysql_host }}'"
- name: Create test database
mysql_db:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ primary_db.port }}'
state: present
name: '{{ test_db }}'
@ -16,12 +16,12 @@
shell: 'mysqldump -P {{ primary_db.port }} -h 127.0.01 --all-databases --master-data=2 > {{ dump_path }}'
- name: Restore the dump to the replica
shell: 'mysql -P {{ replica_db.port }} -h 127.0.0.1 < {{ dump_path }}'
shell: "mysql -P {{ replica_db.port }} -h '{{ mysql_host }}' < {{ dump_path }}"
# Test getmaster mode:
- name: Get master status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ primary_db.port }}"
mode: getmaster
register: master_status
@ -35,10 +35,10 @@
# Test changemaster mode:
- name: Run replication
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: changemaster
master_host: 127.0.0.1
master_host: '{{ mysql_host }}'
master_port: "{{ primary_db.port }}"
master_user: "{{ replication_user }}"
master_password: "{{ replication_pass }}"
@ -54,7 +54,7 @@
# Test startslave mode:
- name: Start slave
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: startslave
register: result
@ -67,7 +67,7 @@
# Test getslave mode:
- name: Get replica status
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: getslave
register: slave_status
@ -75,7 +75,7 @@
- assert:
that:
- slave_status.Is_Slave == true
- slave_status.Master_Host == '127.0.0.1'
- slave_status.Master_Host == ''{{ mysql_host }}''
- slave_status.Exec_Master_Log_Pos == master_status.Position
- slave_status.Master_Port == {{ primary_db.port }}
- slave_status.Last_IO_Errno == 0
@ -85,7 +85,7 @@
# Test stopslave mode:
- name: Stop slave
mysql_replication:
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: "{{ replica_db.port }}"
mode: stopslave
register: result

11
tests/integration/targets/setup_controller/tasks/fake_root.yml Normal file
View file

@ -0,0 +1,11 @@
---
- name: "{{ role_name }} | Fake root | Ensure folder"
ansible.builtin.file:
path: "{{ playbook_dir }}/root"
state: directory
- name: "{{ role_name }} | Fake root | Ensure default file exists"
ansible.builtin.file:
path: "{{ playbook_dir }}/root/.my.cnf"
state: touch

18
tests/integration/targets/setup_controller/tasks/main.yml Normal file
View file

@ -0,0 +1,18 @@
---
####################################################################
# WARNING: These are designed specifically for Ansible tests #
# and should not be used as examples of how to write Ansible roles #
####################################################################
- name: Prepare the fake root folder
ansible.builtin.import_tasks:
file: fake_root.yml
# setvars.yml requires the iproute2 package installed by install.yml
- name: Set variables
ansible.builtin.import_tasks:
file: setvars.yml
- name: Verify all components version under test
ansible.builtin.import_tasks:
file: verify.yml

69
tests/integration/targets/setup_controller/tasks/setvars.yml Normal file
View file

@ -0,0 +1,69 @@
---
- name: "{{ role_name }} | Setvars | Extract Podman/Docker Network Gateway"
ansible.builtin.shell:
cmd: ip route|grep default|awk '{print $3}'
register: ip_route_output
- name: "{{ role_name }} | Setvars | Set Fact"
ansible.builtin.set_fact:
gateway_addr: "{{ ip_route_output.stdout }}"
connector_name_version: >-
{{ lookup(
'file',
'/root/ansible_collections/community/mysql/tests/integration/connector'
) }}
db_engine_version: >-
{{ lookup(
'file',
'/root/ansible_collections/community/mysql/tests/integration/db_engine_version'
) }}
python_version_lookup: >-
{{ lookup(
'file',
'/root/ansible_collections/community/mysql/tests/integration/python'
) }}
ansible_version_lookup: >-
{{ lookup(
'file',
'/root/ansible_collections/community/mysql/tests/integration/ansible'
) }}
- name: "{{ role_name }} | Setvars | Set Fact using above facts"
ansible.builtin.set_fact:
connector_name: "{{ connector_name_version.split('=')[0].strip() }}"
connector_version: "{{ connector_name_version.split('=')[2].strip() }}"
db_engine: "{{ db_engine_version.split(':')[0].strip() }}"
db_version: "{{ db_engine_version.split(':')[1].strip() }}"
python_version: "{{ python_version_lookup.strip() }}"
test_ansible_version: >-
{%- if ansible_version_lookup == 'devel' -%}
{{ ansible_version_lookup }}
{%- else -%}
{{ ansible_version_lookup.split('-')[1].strip() }}
{%- endif -%}
mysql_command: >-
mysql
-h{{ gateway_addr }}
-P{{ mysql_primary_port }}
-u{{ mysql_user }}
-p{{ mysql_password }}
--protocol=tcp
mysql_command_wo_port: >-
mysql
-h{{ gateway_addr }}
-u{{ mysql_user }}
-p{{ mysql_password }}
--protocol=tcp
- name: "{{ role_name }} | Setvars | Output test informations"
vars:
msg: |-
connector_name: {{ connector_name }}
connector_version: {{ connector_version }}
db_engine: {{ db_engine }}
db_version: {{ db_version }}
python_version: {{ python_version }}
test_ansible_version: {{ test_ansible_version }}
ansible.builtin.debug:
msg: "{{ msg.split('\n') }}"

59
tests/integration/targets/setup_controller/tasks/verify.yml Normal file
View file

@ -0,0 +1,59 @@
---
- vars:
mysql_parameters: &mysql_params
login_user: root
login_password: msandbox
login_host: "{{ gateway_addr }}"
login_port: 3307
block:
- name: Query Primary container over TCP for MySQL/MariaDB version
mysql_info:
<<: *mysql_params
filter:
- version
register: primary_info
- name: Assert that test container runs the expected MySQL/MariaDB version
assert:
that:
- "'{{ primary_info.version.major }}.{{ primary_info.version.minor }}\
.{{ primary_info.version.release }}' == '{{ db_version }}'"
- name: Assert that mysql_info module used the expected version of pymysql
assert:
that:
- primary_info.connector_name == connector_name
- primary_info.connector_version == connector_version
when:
- connector_name == 'pymysql'
- name: Assert that mysql_info module used the expected version of mysqlclient
assert:
that:
- primary_info.connector_name == 'MySQLdb'
- primary_info.connector_version == connector_version
when:
- connector_name == 'mysqlclient'
- name: Display the python version in use
command:
cmd: python{{ python_version }} -V
changed_when: false
register: python_in_use
- name: Assert that expected Python is installed
assert:
that:
- python_in_use.stdout is search(python_version)
- name: Assert that we run the expected ansible version
assert:
that:
- >
"{{ ansible_version.major }}.{{ ansible_version.minor }}"
is version(test_ansible_version, '==')
when:
- test_ansible_version != 'devel' # Devel will change overtime

18
tests/integration/targets/setup_mysql/defaults/main.yml
View file

@ -1,18 +0,0 @@
dbdeployer_version: 1.64.0
dbdeployer_home_dir: /opt/dbdeployer
home_dir: /root
mariadb_install: false
mysql_version: 8.0.22
mariadb_version: 10.5.4
mysql_base_port: 3306
percona_client_package: >-
{%- if mariadb_install -%}
mariadb-client
{%- else -%}
percona-server-client-5.7
{%- endif -%}

6
tests/integration/targets/setup_mysql/handlers/main.yml
View file

@ -1,6 +0,0 @@
---
- name: "{{ role_name }} | handler | create dbdeployer installed file"
template:
src: installed_file.j2
dest: "{{ dbdeployer_installed_file }}"
listen: create zookeeper installed file

15
tests/integration/targets/setup_mysql/tasks/config.yml
View file

@ -1,15 +0,0 @@
---
- name: "{{ role_name }} | config | download mysql tarball"
get_url:
url: "{{ install_src }}"
dest: "{{ dbdeployer_sandbox_download_dir }}/{{ install_tarball }}"
- name: "{{ role_name }} | config | run unpack tarball"
shell:
cmd: "dbdeployer unpack {{ dbdeployer_sandbox_download_dir }}/{{ install_tarball }} --flavor {{ install_type }}"
creates: "{{ dbdeployer_sandbox_binary_dir }}/{{ install_version }}"
- name: "{{ role_name }} | config | setup replication topology"
shell:
cmd: "dbdeployer deploy multiple {{ install_version }} --flavor {{ install_type }} --base-port {{ mysql_base_port }} --my-cnf-options=\"master_info_repository='TABLE'\" --my-cnf-options=\"relay_log_info_repository='TABLE'\""
creates: "{{ dbdeployer_sandbox_home_dir }}/multi_msb_{{ install_version|replace('.','_') }}"

11
tests/integration/targets/setup_mysql/tasks/dir.yml
View file

@ -1,11 +0,0 @@
---
- name: "{{ role_name }} | dir | create dbdeployer directories"
file:
state: directory
path: "{{ item }}"
loop:
- "{{ dbdeployer_home_dir }}"
- "{{ dbdeployer_install_dir }}"
- "{{ dbdeployer_sandbox_download_dir }}"
- "{{ dbdeployer_sandbox_binary_dir }}"
- "{{ dbdeployer_sandbox_home_dir }}"

90
tests/integration/targets/setup_mysql/tasks/install.yml
View file

@ -1,90 +0,0 @@
---
- name: "{{ role_name }} | install | add apt signing key for percona"
apt_key:
keyserver: keyserver.ubuntu.com
id: 4D1BB29D63D98E422B2113B19334A25F8507EFA5
state: present
when: install_type == 'mysql'
- name: "{{ role_name }} | install | add percona repositories"
apt_repository:
repo: deb http://repo.percona.com/percona/apt {{ ansible_lsb.codename }} main
state: present
when: install_type == 'mysql'
- name: "{{ role_name }} | install | add apt signing key for mariadb"
apt_key:
keyserver: keyserver.ubuntu.com
id: F1656F24C74CD1D8
state: present
when: install_type == 'mariadb'
- name: "{{ role_name }} | install | add mariadb repositories"
apt_repository:
repo: "deb [arch=amd64,arm64] https://downloads.mariadb.com/MariaDB/mariadb-{{ mysql_major_version }}/repo/ubuntu {{ ansible_lsb.codename }} main"
state: present
when: install_type == 'mariadb'
- name: "{{ role_name }} | install | install packages required by percona"
apt:
name: "{{ percona_mysql_packages }}"
state: present
environment:
DEBIAN_FRONTEND: noninteractive
- name: "{{ role_name }} | install | install packages required by mysql connector"
apt:
name: "{{ install_python_prereqs }}"
state: present
environment:
DEBIAN_FRONTEND: noninteractive
- name: "{{ role_name }} | install | install python packages"
pip:
name: "{{ python_packages }}"
register: connector
- name: Extract connector.name.0 content
set_fact:
connector_name: "{{ connector.name.0 }}"
- name: Debug connector_name content
debug:
msg: '{{ connector_name }}'
- name: Extract connector version
set_fact:
connector_ver: "{{ connector_name.split('=')[2].strip() }}"
- name: Debug connector_ver var content
debug:
msg: '{{ connector_ver }}'
- name: "{{ role_name }} | install | install packages required by mysql"
apt:
name: "{{ install_prereqs }}"
state: present
environment:
DEBIAN_FRONTEND: noninteractive
- name: "{{ role_name }} | install | download and unpack dbdeployer"
unarchive:
remote_src: true
src: "{{ dbdeployer_src }}"
dest: "{{ dbdeployer_install_dir }}"
creates: "{{ dbdeployer_installed_file }}"
register: dbdeployer_tarball_install
notify:
- create zookeeper installed file
until: dbdeployer_tarball_install is not failed
retries: 6
delay: 5
- name: "{{ role_name }} | install | create symlink"
file:
src: "{{ dbdeployer_install_dir }}/dbdeployer-{{ dbdeployer_version }}.linux"
dest: /usr/local/bin/dbdeployer
follow: false
state: link
- meta: flush_handlers

11
tests/integration/targets/setup_mysql/tasks/main.yml
View file

@ -1,11 +0,0 @@
---
####################################################################
# WARNING: These are designed specifically for Ansible tests #
# and should not be used as examples of how to write Ansible roles #
####################################################################
- import_tasks: setvars.yml
- import_tasks: dir.yml
- import_tasks: install.yml
- import_tasks: config.yml
- import_tasks: verify.yml

33
tests/integration/targets/setup_mysql/tasks/setvars.yml
View file

@ -1,33 +0,0 @@
---
- name: "{{ role_name }} | setvars | split mysql version in parts"
set_fact:
mysql_version_parts: >-
{%- if mariadb_install -%}
{{ mariadb_version.split('.') }}
{%- else -%}
{{ mysql_version.split('.') }}
{%- endif -%}
- name: "{{ role_name }} | setvars | get mysql major version"
set_fact:
mysql_major_version: "{{ mysql_version_parts[0] + '.' + mysql_version_parts[1] }}"
- name: "{{ role_name }} | setvars | set the appropriate extension dependent on the mysql version"
set_fact:
mysql_compression_extension: "{{ mysql_version is version('8.0.0', '<') | ternary('gz', 'xz') }}"
- name: "{{ role_name }} | setvars | set the install type"
set_fact:
install_type: "{{ mariadb_install | ternary('mariadb', 'mysql') }}"
- name: "{{ role_name }} | setvars | set install_version"
set_fact:
install_version: "{{ lookup('vars', install_type + '_version') }}"
- name: "{{ role_name }} | setvars | set install_tarball"
set_fact:
install_tarball: "{{ lookup('vars', install_type + '_tarball') }}"
- name: "{{ role_name }} | setvars | set install_src"
set_fact:
install_src: "{{ lookup('vars', install_type + '_src') }}"

27
tests/integration/targets/setup_mysql/tasks/verify.yml
View file

@ -1,27 +0,0 @@
---
- name: "{{ role_name }} | verify | confirm primary is running and get the port"
shell: "{{ dbdeployer_sandbox_home_dir }}/multi_msb_{{ install_version|replace('.','_') }}/n1 -BNe'select @@port'"
register: primary_port
- name: "{{ role_name }} | verify | confirm replica1 is running and get the port"
shell: "{{ dbdeployer_sandbox_home_dir }}/multi_msb_{{ install_version|replace('.','_') }}/n2 -BNe'select @@port'"
register: replica1_port
- name: "{{ role_name }} | verify | confirm replica2 is running and get the port"
shell: "{{ dbdeployer_sandbox_home_dir }}/multi_msb_{{ install_version|replace('.','_') }}/n3 -BNe'select @@port'"
register: replica2_port
- name: "{{ role_name }} | verify | confirm primary is running on expected port"
assert:
that:
- primary_port.stdout|int == 3307
- name: "{{ role_name }} | verify | confirm replica1 is running on expected port"
assert:
that:
- replica1_port.stdout|int == 3308
- name: "{{ role_name }} | verify | confirm replica2 is running on expected port"
assert:
that:
- replica2_port.stdout|int == 3309

1
tests/integration/targets/setup_mysql/templates/installed_file.j2
View file

@ -1 +0,0 @@
{{ dbdeployer_version }}

30
tests/integration/targets/setup_mysql/vars/main.yml
View file

@ -1,30 +0,0 @@
---
dbdeployer_install_dir: "{{ dbdeployer_home_dir }}/dbdeployer_{{ dbdeployer_version }}"
dbdeployer_src: "https://github.com/datacharmer/dbdeployer/releases/download/v{{ dbdeployer_version }}/dbdeployer-{{ dbdeployer_version }}.linux.tar.gz"
dbdeployer_installed_file: "{{ dbdeployer_home_dir }}/dbdeployer_installed"
dbdeployer_sandbox_download_dir: "{{ home_dir }}/downloads"
dbdeployer_sandbox_binary_dir: "{{ home_dir }}/opt/mysql"
dbdeployer_sandbox_home_dir: "{{ home_dir }}/sandboxes"
percona_mysql_packages:
- "{{ percona_client_package }}"
python_packages: [pymysql == 0.9.3]
install_prereqs:
- libaio1
- libnuma1
- libncurses5
install_python_prereqs:
- python3-dev
- python3-cryptography
- default-libmysqlclient-dev
- build-essential
mysql_tarball: "mysql-{{ mysql_version }}-linux-glibc2.12-x86_64.tar.{{ mysql_compression_extension }}"
mysql_src: "https://cdn.mysql.com/archives/mysql-{{ mysql_major_version }}/{{ mysql_tarball }}"
mariadb_url_subdir: "linux"
mariadb_tarball: "mariadb-{{ mariadb_version }}-{{ mariadb_url_subdir }}-x86_64.tar.gz"
mariadb_src: "https://downloads.mariadb.com/MariaDB/mariadb-{{ mariadb_version }}/bintar-{{ mariadb_url_subdir }}-x86_64/{{ mariadb_tarball }}"

1
tests/integration/targets/test_mysql_db/defaults/main.yml
View file

@ -2,6 +2,7 @@
# defaults file for test_mysql_db
mysql_user: root
mysql_password: msandbox
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
# Database names

2
tests/integration/targets/test_mysql_db/meta/main.yml
View file

@ -1,2 +1,2 @@
dependencies:
- setup_mysql
- setup_controller

73
tests/integration/targets/test_mysql_db/tasks/config_overrides_defaults.yml
View file

@ -1,57 +1,59 @@
- set_fact:
---
- name: Config overrides | Set facts
set_fact:
db_to_create: testdb1
config_file: "/root/.my1.cnf"
config_file: "{{ playbook_dir }}/.my1.cnf"
fake_port: 9999
fake_host: "blahblah.local"
include_dir: "/root/mycnf.d"
include_dir: "{{ playbook_dir }}/mycnf.d"
- name: Create custom config file
- name: Config overrides | Create custom config file
shell: 'echo "[client]" > {{ config_file }}'
- name: Add fake port to config file
- name: Config overrides | Add fake port to config file
shell: 'echo "port = {{ fake_port }}" >> {{ config_file }}'
- name: Add blank line
- name: Config overrides | Add blank line
shell: 'echo "" >> {{ config_file }}'
when:
- >
connector_name is not search('pymysql')
connector_name != 'pymysql'
or (
connector_name is search('pymysql')
and connector_ver is version('0.9.3', '>=')
connector_name == 'pymysql'
and connector_version is version('0.9.3', '>=')
)
- name: Create include_dir
- name: Config overrides | Create include_dir
file:
path: '{{ include_dir }}'
state: directory
mode: '0777'
when:
- >
connector_name is not search('pymysql')
connector_name != 'pymysql'
or (
connector_name is search('pymysql')
and connector_ver is version('0.9.3', '>=')
connector_name == 'pymysql'
and connector_version is version('0.9.3', '>=')
)
- name: Add include_dir
- name: Config overrides | Add include_dir
lineinfile:
path: '{{ config_file }}'
line: '!includedir {{ include_dir }}'
insertafter: EOF
when:
- >
connector_name is not search('pymysql')
connector_name != 'pymysql'
or (
connector_name is search('pymysql')
and connector_ver is version('0.9.3', '>=')
connector_name == 'pymysql'
and connector_version is version('0.9.3', '>=')
)
- name: Create database using fake port to connect to, must fail
- name: Config overrides | Create database using fake port to connect to, must fail
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_to_create }}'
state: present
@ -61,17 +63,17 @@
ignore_errors: yes
register: result
- name: Must fail because login_port default has beed overriden by wrong value from config file
- name: Config overrides | Must fail because login_port default has beed overriden by wrong value from config file
assert:
that:
- result is failed
- result.msg is search("unable to connect to database")
- result is failed
- result.msg is search("unable to connect to database")
- name: Create database using default port
- name: Config overrides | Create database using default port
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_to_create }}'
state: present
@ -80,22 +82,22 @@
config_overrides_defaults: no
register: result
- name: Must not fail because of the default of login_port is correct
- name: Config overrides | Must not fail because of the default of login_port is correct
assert:
that:
- result is changed
- result is changed
- name: Reinit custom config file
- name: Config overrides | Reinit custom config file
shell: 'echo "[client]" > {{ config_file }}'
- name: Add fake host to config file
- name: Config overrides | Add fake host to config file
shell: 'echo "host = {{ fake_host }}" >> {{ config_file }}'
- name: Remove database using fake login_host
- name: Config overrides | Remove database using fake login_host
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_to_create }}'
state: absent
@ -104,18 +106,17 @@
register: result
ignore_errors: yes
- name: Must fail because login_host default has beed overriden by wrong value from config file
- name: Config overrides | Must fail because login_host default has beed overriden by wrong value from config file
assert:
that:
- result is failed
- result.msg is search("Can't connect to MySQL server on '{{ fake_host }}'") or result.msg is search("Unknown MySQL server host '{{ fake_host }}'")
- result is failed
- result.msg is search("Can't connect to MySQL server on '{{ fake_host }}'") or result.msg is search("Unknown MySQL server host '{{ fake_host }}'")
# Clean up
- name: Remove test db
- name: Config overrides | Clean up test database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_to_create }}'
state: absent

52
tests/integration/targets/test_mysql_db/tasks/encoding_dump_import.yml
View file

@ -1,45 +1,46 @@
---
- set_fact:
latin1_file1: "{{tmp_dir}}/{{file}}"
- name: Encoding | Set fact
set_fact:
latin1_file1: "{{ tmp_dir }}/{{ file }}"
- name: Deleting Latin1 encoded Database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_latin1_name }}'
state: absent
- name: create Latin1 encoded database
- name: Encoding | Create Latin1 encoded database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_latin1_name }}'
state: present
encoding: latin1
- name: create a table in Latin1 database
- name: Encoding | Create a table in Latin1 database
command: "{{ mysql_command }} {{ db_latin1_name }} -e \"create table testlatin1(id int, name varchar(100))\""
# Inserting a string in latin1 into table, , this string be tested later,
# so report any change of content in the test too
- name: inserting data into Latin1 database
- name: Encoding | Inserting data into Latin1 database
command: "{{ mysql_command }} {{ db_latin1_name }} -e \"insert into testlatin1 value(47,'Amédée Bôlüt')\""
- name: selecting table
- name: Encoding | Selecting table
command: "{{ mysql_command }} {{ db_latin1_name }} -e \"select * from testlatin1\""
register: output
- name: Dumping a table in Latin1 database
- name: Encoding | Dumping a table in Latin1 database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: "{{ db_latin1_name }}"
encoding: latin1
@ -49,30 +50,30 @@
- assert:
that:
- result is changed
- result is changed
- name: state dump - file name should exist
- name: Encoding | State dump - file name should exist (latin1_file1)
file:
name: '{{ latin1_file1 }}'
state: file
- name: od the file and check of latin1 encoded string is present
- name: od the file and check of latin1 encoded string is present
shell: grep -a 47 {{ latin1_file1 }} | od -c |grep "A m 351 d 351 e B 364\|A m 303 251 d 303 251 e B 303"
- name: Dropping {{ db_latin1_name }} database
- name: Encoding | Dropping {{ db_latin1_name }} database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_latin1_name }}'
state: absent
- name: Importing the latin1 mysql script
- name: Encoding | Importing the latin1 mysql script
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
state: import
encoding: latin1
@ -80,20 +81,25 @@
target: "{{ latin1_file1 }}"
register: result
- assert:
- name: Encoding | Assert that importing latin1 is changed
assert:
that:
- result is changed
- result is changed
- name: check encoding of table
shell: "{{ mysql_command }} {{ db_latin1_name }} -e \"SHOW FULL COLUMNS FROM testlatin1\""
- name: Encoding | Check encoding of table
ansible.builtin.command:
cmd: >
{{ mysql_command }}
{{ db_latin1_name }}
-e "SHOW FULL COLUMNS FROM {{ db_latin1_name }}.testlatin1"
register: output
failed_when: '"latin1_swedish_ci" not in output.stdout'
- name: remove database
- name: Encoding | Clean up database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_latin1_name }}'
state: absent

16
tests/integration/targets/test_mysql_db/tasks/issue-28.yml
View file

@ -9,7 +9,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
when: tls_enabled
block:
@ -25,6 +25,7 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host_all: true
state: absent
ignore_errors: yes
@ -32,6 +33,7 @@
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
host: "%"
password: "{{ user_password_1 }}"
priv: '*.*:ALL,GRANT'
tls_requires:
@ -43,7 +45,7 @@
state: absent
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
register: result
@ -52,12 +54,14 @@
- assert:
that:
- result is failed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
- assert:
that:
- result is succeeded
when: connector_name is not search('pymysql')
when:
- connector_name != 'pymysql'
- name: attempt connection with newly created user ignoring hostname
mysql_db:
@ -65,7 +69,7 @@
state: absent
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
check_hostname: no
@ -80,5 +84,5 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host: 127.0.0.1
host_all: true
state: absent

5
tests/integration/targets/test_mysql_db/tasks/main.yml
View file

@ -1,3 +1,4 @@
---
####################################################################
# WARNING: These are designed specifically for Ansible tests #
# and should not be used as examples of how to write Ansible roles #
@ -21,10 +22,6 @@
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} -P{{ mysql_primary_port }} --protocol=tcp"
- name: Check state present/absent
include_tasks: state_present_absent.yml
vars:

45
tests/integration/targets/test_mysql_db/tasks/multi_db_create_delete.yml
View file

@ -18,7 +18,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -43,7 +43,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -75,7 +75,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -107,7 +107,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -139,7 +139,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -170,7 +170,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db2_name }}'
@ -199,7 +199,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -231,7 +231,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -271,7 +271,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -308,7 +308,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- "{{ db1_name }}"
@ -348,7 +348,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- "{{ db4_name }}"
@ -384,11 +384,12 @@
# ==========================================================================
# Dump existing databases
- name: Dump existing databases
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'
@ -398,13 +399,13 @@
target: '{{ dump1_file }}'
register: dump_result
- name: assert successful completion of dump operation
- name: Assert successful completion of dump operation (existing database)
assert:
that:
- dump_result is changed
- dump_result.db_list == ['{{ db1_name }}', '{{ db2_name }}', '{{ db3_name }}']
- name: run command to list databases like specified database name
- name: Run command to list databases like specified database name
command: "{{ mysql_command }} \"-e show databases like 'database%'\""
register: mysql_result
@ -415,7 +416,7 @@
- "'{{ db2_name }}' in mysql_result.stdout"
- "'{{ db3_name }}' in mysql_result.stdout"
- name: state dump - file name should exist
- name: State dump - file name should exist (dump1_file)
file:
name: '{{ dump1_file }}'
state: file
@ -441,7 +442,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: all
state: dump
@ -466,7 +467,7 @@
- "'{{ db4_name }}' not in mysql_result.stdout"
- "'{{ db5_name }}' not in mysql_result.stdout"
- name: state dump - file name should exist
- name: state dump - file name should exist (dump2_file)
file:
name: '{{ dump2_file }}'
state: file
@ -479,7 +480,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db2_name }}'
@ -509,7 +510,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db2_name }}'
@ -539,7 +540,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db2_name }}'
@ -569,7 +570,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db2_name }}'
@ -598,7 +599,7 @@
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db1_name }}'

199
tests/integration/targets/test_mysql_db/tasks/state_dump_import.yml
View file

@ -17,113 +17,116 @@
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# ============================================================
- set_fact:
- name: Dump and Import | Set facts
set_fact:
db_file_name: "{{ tmp_dir }}/{{ file }}"
wrong_sql_file: "{{ tmp_dir }}/wrong.sql"
dump_file1: "{{ tmp_dir }}/{{ file2 }}"
dump_file2: "{{ tmp_dir }}/{{ file3 }}"
db_user: "test"
db_user_unsafe_password: "pass!word"
config_file: "/root/.my.cnf"
config_file: "{{ playbook_dir }}/root/.my.cnf"
- name: create custom config file
- name: Dump and Import | Create custom config file
shell: 'echo "[client]" > {{ config_file }}'
- name: create user for test unsafe_login_password parameter
- name: Dump and Import | Create user for test unsafe_login_password parameter
mysql_user:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_user }}'
host: '%'
password: '{{ db_user_unsafe_password }}'
priv: '*.*:ALL'
state: present
- name: state dump/import - create database
- name: Dump and Import | State dump/import - create database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: present
check_implicit_admin: yes
- name: create database
- name: Dump and Import | Create database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: present
check_implicit_admin: no
- name: state dump/import - create table department
- name: Dump and Import | State dump/import - create table department
command: "{{ mysql_command }} {{ db_name }} \"-e create table department(id int, name varchar(100))\""
- name: state dump/import - create table employee
- name: Dump and Import | State dump/import - create table employee
command: "{{ mysql_command }} {{ db_name }} \"-e create table employee(id int, name varchar(100))\""
- name: state dump/import - insert data into table employee
- name: Dump and Import | State dump/import - insert data into table employee
command: "{{ mysql_command }} {{ db_name }} \"-e insert into employee value(47,'Joe Smith')\""
- name: state dump/import - insert data into table department
- name: Dump and Import | State dump/import - insert data into table department
command: "{{ mysql_command }} {{ db_name }} \"-e insert into department value(2,'Engineering')\""
- name: state dump/import - file name should not exist
- name: Dump and Import | State dump/import - file name should not exist
file:
name: '{{ db_file_name }}'
state: absent
- name: database dump file1 should not exist
- name: Dump and Import | Database dump file1 should not exist
file:
name: '{{ dump_file1 }}'
state: absent
- name: database dump file2 should not exist
- name: Dump and Import | Database dump file2 should not exist
file:
name: '{{ dump_file2 }}'
state: absent
- name: state dump without department table.
- name: Dump and Import | State dump without department table.
mysql_db:
login_user: '{{ db_user }}'
login_password: '{{ db_user_unsafe_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
unsafe_login_password: yes
name: '{{ db_name }}'
state: dump
target: '{{ db_file_name }}'
ignore_tables:
- "{{ db_name }}.department"
- "{{ db_name }}.department"
force: yes
master_data: 1
skip_lock_tables: yes
dump_extra_args: --skip-triggers
dump_extra_args: >-
--skip-triggers
config_file: '{{ config_file }}'
restrict_config_file: yes
check_implicit_admin: no
register: result
- name: assert successful completion of dump operation
- name: Dump and Import | Assert successful completion of dump operation
assert:
that:
- result is changed
- result.executed_commands[0] is search("mysqldump --defaults-file={{ config_file }} --user={{ db_user }} --password=\*\*\*\*\*\*\*\* --force --host=127.0.0.1 --port={{ mysql_primary_port }} {{ db_name }} --skip-lock-tables --quick --ignore-table={{ db_name }}.department --master-data=1 --skip-triggers")
- result.executed_commands[0] is search(".department --master-data=1 --skip-triggers")
- name: state dump/import - file name should exist
- name: Dump and Import | State dump/import - file name should exist (db_file_name)
file:
name: '{{ db_file_name }}'
state: file
- name: state dump with multiple databases in comma separated form.
- name: Dump and Import | State dump with multiple databases in comma separated form for MySQL.
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: "{{ db_name }},{{ db_name2 }}"
state: dump
@ -131,22 +134,22 @@
check_implicit_admin: yes
register: dump_result1
- name: assert successful completion of dump operation (with multiple databases in comma separated form)
- name: Dump and Import | Assert successful completion of dump operation (with multiple databases in comma separated form)
assert:
that:
- dump_result1 is changed
- dump_result1.executed_commands[0] is search(" --user=root --password=\*\*\*\*\*\*\*\*")
- name: state dump - dump file1 should exist
- name: Dump and Import | State dump - dump file1 should exist
file:
name: '{{ dump_file1 }}'
state: file
- name: state dump with multiple databases in list form via check_mode
- name: Dump and Import | State dump with multiple databases in list form via check_mode
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db_name }}'
@ -156,26 +159,26 @@
register: dump_result
check_mode: yes
- name: assert successful completion of dump operation (with multiple databases in list form) via check mode
- name: Dump and Import | Assert successful completion of dump operation (with multiple databases in list form) via check mode
assert:
that:
- dump_result is changed
- name: database dump file2 should not exist
- name: Dump and Import | Database dump file2 should not exist
stat:
path: '{{ dump_file2 }}'
register: stat_result
- name: assert that check_mode does not create dump file for databases
- name: Dump and Import | Assert that check_mode does not create dump file for databases
assert:
that:
- stat_result.stat.exists is defined and not stat_result.stat.exists
- name: state dump with multiple databases in list form.
- name: Dump and Import | State dump with multiple databases in list form.
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name:
- '{{ db_name }}'
@ -184,39 +187,39 @@
target: '{{ dump_file2 }}'
register: dump_result2
- name: assert successful completion of dump operation (with multiple databases in list form)
- name: Dump and Import | Assert successful completion of dump operation (with multiple databases in list form)
assert:
that:
- dump_result2 is changed
- name: state dump - dump file2 should exist
- name: Dump and Import | State dump - dump file2 should exist
file:
name: '{{ dump_file2 }}'
state: file
- name: state dump/import - remove database
- name: Dump and Import | State dump/import - remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: absent
- name: remove database
- name: Dump and Import | Remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: absent
- name: test state=import to restore the database of type {{ format_type }} (expect changed=true)
- name: Dump and Import | Test state=import to restore the database of type {{ format_type }} (expect changed=true)
mysql_db:
login_user: '{{ db_user }}'
login_password: '{{ db_user_unsafe_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
unsafe_login_password: yes
name: '{{ db_name }}'
@ -225,20 +228,20 @@
use_shell: yes
register: result
- name: show the tables
- name: Dump and Import | Show the tables
command: "{{ mysql_command }} {{ db_name }} \"-e show tables\""
register: result
- name: assert that the department table is absent.
- name: Dump and Import | Assert that the department table is absent.
assert:
that:
- "'department' not in result.stdout"
- name: test state=import to restore a database from multiple database dumped file1
- name: Dump and Import | Test state=import to restore a database from multiple database dumped file1
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: import
@ -246,34 +249,34 @@
use_shell: no
register: import_result
- name: assert output message restored a database from dump file1
- name: Dump and Import | Assert output message restored a database from dump file1
assert:
that:
- import_result is changed
- name: remove database
- name: Dump and Import | Remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: absent
- name: run command to list databases
- name: Dump and Import | Run command to list databases
command: "{{ mysql_command }} \"-e show databases like 'data%'\""
register: mysql_result
- name: assert that db_name2 database does not exist
- name: Dump and Import | Assert that db_name2 database does not exist
assert:
that:
- "'{{ db_name2 }}' not in mysql_result.stdout"
- name: test state=import to restore a database from dumped file2 (check mode)
- name: Dump and Import | Test state=import to restore a database from dumped file2 (check mode)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: import
@ -281,96 +284,96 @@
register: check_import_result
check_mode: yes
- name: assert output message restored a database from dump file2 (check mode)
- name: Dump and Import | Assert output message restored a database from dump file2 (check mode)
assert:
that:
- check_import_result is changed
- name: run command to list databases
- name: Dump and Import | Run command to list databases
command: "{{ mysql_command }} \"-e show databases like 'data%'\""
register: mysql_result
- name: assert that db_name2 database does not exist (check mode)
- name: Dump and Import | Assert that db_name2 database does not exist (check mode)
assert:
that:
- "'{{ db_name2 }}' not in mysql_result.stdout"
- name: test state=import to restore a database from multiple database dumped file2
- name: Dump and Import | Test state=import to restore a database from multiple database dumped file2
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: import
target: '{{ dump_file2 }}'
register: import_result2
- name: assert output message restored a database from dump file2
- name: Dump and Import | Assert output message restored a database from dump file2
assert:
that:
- import_result2 is changed
- import_result2.db_list == ['{{ db_name2 }}']
- name: run command to list databases
- name: Dump and Import | Run command to list databases
command: "{{ mysql_command }} \"-e show databases like 'data%'\""
register: mysql_result
- name: assert that db_name2 database does exist after import
- name: Dump and Import | Assert that db_name2 database does exist after import
assert:
that:
- "'{{ db_name2 }}' in mysql_result.stdout"
- name: test state=dump to backup the database of type {{ format_type }} (expect changed=true)
- name: Dump and Import | Test state=dump to backup the database of type {{ format_type }} (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: dump
target: '{{ db_file_name }}'
register: result
- name: assert output message backup the database
- name: Dump and Import | Assert output message backup the database
assert:
that:
- result is changed
- "result.db =='{{ db_name }}'"
# - name: assert database was backed up successfully
# - name: Dump and Import | Assert database was backed up successfully
# command: "file {{ db_file_name }}"
# register: result
#
# - name: assert file format type
# - name: Dump and Import | Assert file format type
# assert:
# that:
# - "'{{ format_msg_type }}' in result.stdout"
- name: update database table employee
- name: Dump and Import | Update database table employee
command: "{{ mysql_command }} {{ db_name }} \"-e update employee set name='John Doe' where id=47\""
- name: test state=import to restore the database of type {{ format_type }} (expect changed=true)
- name: Dump and Import | Test state=import to restore the database of type {{ format_type }} (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: import
target: '{{ db_file_name }}'
register: result
- name: assert output message restore the database
- name: Dump and Import | Assert output message restore the database
assert:
that:
- result is changed
- name: select data from table employee
- name: Dump and Import | Select data from table employee
command: "{{ mysql_command }} {{ db_name }} \"-e select * from employee\""
register: result
- name: assert data in database is from the restore database
- name: Dump and Import | Assert data in database is from the restore database
assert:
that:
- "'47' in result.stdout"
@ -380,14 +383,14 @@
# Test ``force`` parameter
##########################
- name: create wrong sql file
- name: Dump and Import | Create wrong sql file
shell: echo 'CREATE TABLE hello (id int); CREATE ELBAT ehlo (int id);' >> '{{ wrong_sql_file }}'
- name: try to import without force parameter, must fail
- name: Dump and Import | Try to import without force parameter, must fail
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: import
@ -400,11 +403,11 @@
that:
- result is failed
- name: try to import with force parameter
- name: Dump and Import | Try to import with force parameter
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: import
@ -420,40 +423,24 @@
# Clean up
##########
- name: remove database name
- name: Dump and Import | Clean up databases
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
name: '{{ item }}'
state: absent
loop:
- '{{ db_name }}'
- '{{ db_name2 }}'
- name: remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name2 }}'
state: absent
- name: remove file name
- name: Dump and Import | Clean up files
file:
name: '{{ db_file_name }}'
state: absent
- name: remove file name
file:
name: '{{ wrong_sql_file }}'
state: absent
- name: remove dump file1
file:
name: '{{ dump_file1 }}'
state: absent
- name: remove dump file2
file:
name: '{{ dump_file2 }}'
name: '{{ item }}'
state: absent
loop:
- '{{ db_file_name }}'
- '{{ wrong_sql_file }}'
- '{{ dump_file1 }}'
- '{{ dump_file2 }}'

108
tests/integration/targets/test_mysql_db/tasks/state_present_absent.yml
View file

@ -1,3 +1,4 @@
---
# test code for mysql_db module with database name containing special chars
# This file is part of Ansible
@ -16,75 +17,75 @@
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# ============================================================
- name: remove database if it exists
- name: State Present Absent | Remove database if it exists
command: >
"{{ mysql_command }} -sse 'DROP DATABASE IF EXISTS {{ db_name }}'"
ignore_errors: true
- name: make sure the test database is not there
- name: State Present Absent | Make sure the test database is not there
command: "{{ mysql_command }} {{ db_name }}"
register: mysql_db_check
failed_when: "'1049' not in mysql_db_check.stderr"
- name: test state=present for a database name (expect changed=true)
- name: State Present Absent | Test state=present for a database name (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: present
register: result
- name: assert output message that database exist
- name: State Present Absent | Assert output message that database exist
assert:
that:
- result is changed
- result.db == '{{ db_name }}'
- result.executed_commands == ["CREATE DATABASE `{{ db_name }}`"]
- name: run command to test state=present for a database name (expect db_name in stdout)
- name: State Present Absent | Run command to test state=present for a database name (expect db_name in stdout)
command: "{{ mysql_command }} -e \"show databases like '{{ db_name | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database exist
- name: State Present Absent | Assert database exist
assert:
that:
- "'{{ db_name }}' in result.stdout"
# ============================================================
- name: test state=absent for a database name (expect changed=true)
- name: State Present Absent | Test state=absent for a database name (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_name }}'
state: absent
register: result
- name: assert output message that database does not exist
- name: State Present Absent | Assert output message that database does not exist
assert:
that:
- result is changed
- result.db == '{{ db_name }}'
- result.executed_commands == ["DROP DATABASE `{{ db_name }}`"]
- name: run command to test state=absent for a database name (expect db_name not in stdout)
- name: State Present Absent | Run command to test state=absent for a database name (expect db_name not in stdout)
command: "{{ mysql_command }} -e \"show databases like '{{ db_name | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database does not exist
- name: State Present Absent | Assert database does not exist
assert:
that:
- "'{{ db_name }}' not in result.stdout"
# ============================================================
- name: test mysql_db encoding param not valid - issue 8075
- name: State Present Absent | Test mysql_db encoding param not valid - issue 8075
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: datanotvalid
state: present
@ -92,7 +93,7 @@
register: result
ignore_errors: true
- name: assert test mysql_db encoding param not valid - issue 8075 (failed=true)
- name: State Present Absent | Assert test mysql_db encoding param not valid - issue 8075 (failed=true)
assert:
that:
- result is failed
@ -100,201 +101,202 @@
- "'Unknown character set' in result.msg"
# ============================================================
- name: test mysql_db using a valid encoding utf8 (expect changed=true)
- name: State Present Absent | Test mysql_db using a valid encoding utf8 (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: 'en{{ db_name }}'
state: present
encoding: utf8
register: result
- name: assert output message created a database
- name: State Present Absent | Assert output message created a database
assert:
that:
- result is changed
- result.executed_commands == ["CREATE DATABASE `en{{ db_name }}` CHARACTER SET 'utf8'"]
- name: test database was created
- name: State Present Absent | Test database was created
command: "{{ mysql_command }} -e \"SHOW CREATE DATABASE `en{{ db_name }}`\""
register: result
- name: assert created database is of encoding utf8
- name: State Present Absent | Assert created database is of encoding utf8
assert:
that:
- "'utf8' in result.stdout"
- name: remove database
- name: State Present Absent | Remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: 'en{{ db_name }}'
state: absent
# ============================================================
- name: test mysql_db using valid encoding binary (expect changed=true)
- name: State Present Absent | Test mysql_db using valid encoding binary (expect changed=true)
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: 'en{{ db_name }}'
state: present
encoding: binary
register: result
- name: assert output message that database was created
- name: State Present Absent | Assert output message that database was created
assert:
that:
- result is changed
- result.executed_commands == ["CREATE DATABASE `en{{ db_name }}` CHARACTER SET 'binary'"]
- name: run command to test database was created
- name: State Present Absent | Run command to test database was created
command: "{{ mysql_command }} -e \"SHOW CREATE DATABASE `en{{ db_name }}`\""
register: result
- name: assert created database is of encoding binary
- name: State Present Absent | Assert created database is of encoding binary
assert:
that:
- "'binary' in result.stdout"
- name: remove database
- name: State Present Absent | Remove database
mysql_db:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: 'en{{ db_name }}'
state: absent
# ============================================================
- name: create user1 to access database dbuser1
- name: State Present Absent | Create user1 to access database dbuser1
mysql_user:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: user1
host: '%'
password: 'Hfd6fds^dfA8Ga'
priv: '*.*:ALL'
state: present
- name: create database dbuser1 using user1
- name: State Present Absent | Create database dbuser1 using user1
mysql_db:
login_user: user1
login_password: 'Hfd6fds^dfA8Ga'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_user1 }}'
state: present
register: result
- name: assert output message that database was created
- name: State Present Absent | Assert output message that database was created
assert:
that:
- result is changed
- name: run command to test database was created using user1
- name: State Present Absent | Run command to test database was created using user1
command: "{{ mysql_command }} -e \"show databases like '{{ db_user1 | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database exist
- name: State Present Absent | Assert database exist
assert:
that:
- "'{{ db_user1 }}' in result.stdout"
# ============================================================
- name: create user2 to access database with privilege select only
- name: State Present Absent | Create user2 to access database with privilege select only
mysql_user:
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: user2
password: 'kjsfd&F7safjad'
priv: '*.*:SELECT'
state: present
- name: create database dbuser2 using user2 with no privilege to create (expect failed=true)
- name: State Present Absent | Create database dbuser2 using user2 with no privilege to create (expect failed=true)
mysql_db:
login_user: user2
login_password: 'kjsfd&F7safjad'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_user2 }}'
state: present
register: result
ignore_errors: true
- name: assert output message that database was not created using dbuser2
- name: State Present Absent | Assert output message that database was not created using dbuser2
assert:
that:
- result is failed
- "'Access denied' in result.msg"
- name: run command to test that database was not created
- name: State Present Absent | Run command to test that database was not created
command: "{{ mysql_command }} -e \"show databases like '{{ db_user2 | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database does not exist
- name: State Present Absent | Assert database does not exist
assert:
that:
- "'{{ db_user2 }}' not in result.stdout"
# ============================================================
- name: delete database using user2 with no privilege to delete (expect failed=true)
- name: State Present Absent | Delete database using user2 with no privilege to delete (expect failed=true)
mysql_db:
login_user: user2
login_password: 'kjsfd&F7safjad'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_user1 }}'
state: absent
register: result
ignore_errors: true
- name: assert output message that database was not deleted using dbuser2
- name: State Present Absent | Assert output message that database was not deleted using dbuser2
assert:
that:
- result is failed
- "'Access denied' in result.msg"
- name: run command to test database was not deleted
- name: State Present Absent | Run command to test database was not deleted
command: "{{ mysql_command }} -e \"show databases like '{{ db_user1 | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database still exist
- name: State Present Absent | Assert database still exist
assert:
that:
- "'{{ db_user1 }}' in result.stdout"
# ============================================================
- name: delete database using user1 with all privilege to delete a database (expect changed=true)
- name: State Present Absent | Delete database using user1 with all privilege to delete a database (expect changed=true)
mysql_db:
login_user: user1
login_password: 'Hfd6fds^dfA8Ga'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: '{{ db_user1 }}'
state: absent
register: result
ignore_errors: true
- name: assert output message that database was deleted using user1
- name: State Present Absent | Assert output message that database was deleted using user1
assert:
that:
- result is changed
- result.executed_commands == ["DROP DATABASE `{{ db_user1 }}`"]
- name: run command to test database was deleted using user1
- name: State Present Absent | Run command to test database was deleted using user1
command: "{{ mysql_command }} -e \"show databases like '{{ db_name | regex_replace(\"([%_\\\\])\", \"\\\\\\1\") }}'\""
register: result
- name: assert database does not exist
- name: State Present Absent | Assert database does not exist
assert:
that:
- "'{{ db_user1 }}' not in result.stdout"

2
tests/integration/targets/test_mysql_info/defaults/main.yml
View file

@ -2,7 +2,7 @@
# defaults file for test_mysql_info
mysql_user: root
mysql_password: msandbox
mysql_host: 127.0.0.1
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
db_name: data

3
tests/integration/targets/test_mysql_info/meta/main.yml
View file

@ -1,3 +1,4 @@
---
dependencies:
- setup_mysql
- setup_controller
- setup_remote_tmp_dir

6
tests/integration/targets/test_mysql_info/tasks/connector_info.yml
View file

@ -2,7 +2,6 @@
# Added in 1.5.0, 2.4.0 and 3.6.0 in
# https://github.com/ansible-collections/community.mysql/pull/497
# TODO: Refactor in PR490.
- name: Connector info | Assert connector_name exists and has expected values
ansible.builtin.assert:
that:
@ -15,18 +14,17 @@
{{ result.connector_name | d('Unknown')}} which is different than expected
pymysql or MySQLdb
# TODO: Refactor in PR490.
- name: Connector info | Assert connector_version exists and has expected values
ansible.builtin.assert:
that:
- result.connector_version is defined
- >
result.connector_version == 'Unknown'
or result.connector_version is version(connector_ver, '==')
or result.connector_version is version(connector_version, '==')
success_msg: >-
Assertions passed, result.connector_version is
{{ result.connector_version }}
fail_msg: >-
Assertion failed, result.connector_version is
{{ result.connector_version }} which is different than expected
{{ connector_ver }}
{{ connector_version }}

19
tests/integration/targets/test_mysql_info/tasks/issue-28.yml
View file

@ -1,7 +1,4 @@
---
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} -P{{ mysql_primary_port }} --protocol=tcp"
- name: set fact tls_enabled
command: "{{ mysql_command }} \"-e SHOW VARIABLES LIKE 'have_ssl';\""
@ -13,7 +10,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
when: tls_enabled
block:
@ -29,6 +26,7 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host_all: true
state: absent
ignore_errors: yes
@ -36,6 +34,7 @@
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
host: "%"
password: "{{ user_password_1 }}"
tls_requires:
SSL:
@ -45,7 +44,7 @@
filter: version
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
register: result
@ -54,19 +53,21 @@
- assert:
that:
- result is failed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
- assert:
that:
- result is succeeded
when: connector_name is not search('pymysql')
when:
- connector_name != 'pymysql'
- name: attempt connection with newly created user ignoring hostname
mysql_info:
filter: version
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
check_hostname: no
@ -81,5 +82,5 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host: 127.0.0.1
host_all: true
state: absent

28
tests/integration/targets/test_mysql_info/tasks/main.yml
View file

@ -1,3 +1,4 @@
---
####################################################################
# WARNING: These are designed specifically for Ansible tests #
# and should not be used as examples of how to write Ansible roles #
@ -24,14 +25,14 @@
- name: mysql_info - create default config file
template:
src: my.cnf.j2
dest: /root/.my.cnf
dest: "{{ playbook_dir }}/root/.my.cnf"
mode: '0400'
# Create non-default MySQL config file with credentials
- name: mysql_info - create non-default config file
template:
src: my.cnf.j2
dest: /root/non-default_my.cnf
dest: "{{ playbook_dir }}/root/non-default_my.cnf"
mode: '0400'
###############
@ -43,17 +44,18 @@
login_user: '{{ mysql_user }}'
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
config_file: "{{ playbook_dir }}/root/.my.cnf"
register: result
- assert:
that:
- result is not changed
- "mysql_version in result.version.full or mariadb_version in result.version.full"
- result.settings != {}
- result.global_status != {}
- result.databases != {}
- result.engines != {}
- result.users != {}
- result is not changed
- db_version in result.version.full
- result.settings != {}
- result.global_status != {}
- result.databases != {}
- result.engines != {}
- result.users != {}
- name: mysql_info - Test connector informations display
ansible.builtin.import_tasks:
@ -65,7 +67,7 @@
login_user: '{{ mysql_user }}'
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
config_file: /root/non-default_my.cnf
config_file: "{{ playbook_dir }}/root/non-default_my.cnf"
register: result
- assert:
@ -78,9 +80,9 @@
file:
path: '{{ item }}'
state: absent
with_items:
- /root/.my.cnf
- /root/non-default_my.cnf
loop:
- "{{ playbook_dir }}/.my.cnf"
- "{{ playbook_dir }}/non-default_my.cnf"
# Access with password
- name: mysql_info - check access with password

1
tests/integration/targets/test_mysql_query/defaults/main.yml
View file

@ -1,5 +1,6 @@
mysql_user: root
mysql_password: msandbox
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
db_name: data

3
tests/integration/targets/test_mysql_query/meta/main.yml
View file

@ -1,2 +1,3 @@
---
dependencies:
- setup_mysql
- setup_controller

19
tests/integration/targets/test_mysql_query/tasks/issue-28.yml
View file

@ -1,7 +1,4 @@
---
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} -P{{ mysql_primary_port }} --protocol=tcp"
- name: set fact tls_enabled
command: "{{ mysql_command }} \"-e SHOW VARIABLES LIKE 'have_ssl';\""
@ -13,7 +10,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
when: tls_enabled
block:
@ -29,6 +26,7 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host_all: true
state: absent
ignore_errors: yes
@ -36,6 +34,7 @@
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
host: "%"
password: "{{ user_password_1 }}"
tls_requires:
SSL:
@ -45,7 +44,7 @@
query: 'SHOW DATABASES'
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
register: result
@ -54,19 +53,21 @@
- assert:
that:
- result is failed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
- assert:
that:
- result is succeeded
when: connector_name is not search('pymysql')
when:
- connector_name != 'pymysql'
- name: attempt connection with newly created user ignoring hostname
mysql_query:
query: 'SHOW DATABASES'
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
check_hostname: no
@ -81,5 +82,5 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host: 127.0.0.1
host: "%"
state: absent

99
tests/integration/targets/test_mysql_query/tasks/mysql_query_initial.yml
View file

@ -1,3 +1,4 @@
---
# Test code for mysql_query module
# Copyright: (c) 2020, Andrew Klychkov (@Andersson007) <aaklychkov@mail.ru>
# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
@ -5,7 +6,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
@ -16,7 +17,8 @@
query: 'CREATE DATABASE {{ test_db }}'
register: result
- assert:
- name: Assert that create db test_db is changed and returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['CREATE DATABASE {{ test_db }}']
@ -28,7 +30,8 @@
query: 'CREATE TABLE {{ test_table1 }} (id int)'
register: result
- assert:
- name: Assert that create table test_table1 is changed and returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['CREATE TABLE {{ test_table1 }} (id int)']
@ -38,12 +41,13 @@
<<: *mysql_params
login_db: '{{ test_db }}'
query:
- 'INSERT INTO {{ test_table1 }} VALUES (1), (2)'
- 'INSERT INTO {{ test_table1 }} VALUES (3)'
- 'INSERT INTO {{ test_table1 }} VALUES (1), (2)'
- 'INSERT INTO {{ test_table1 }} VALUES (3)'
single_transaction: yes
register: result
- assert:
- name: Assert that inserting test data is changed and returns expected query and results
assert:
that:
- result is changed
- result.rowcount == [2, 1]
@ -56,7 +60,8 @@
query: 'SELECT * FROM {{ test_table1 }}'
register: result
- assert:
- name: Assert that query data in test_table1 is not changed and returns expected query and results
assert:
that:
- result is not changed
- result.executed_queries == ['SELECT * FROM {{ test_table1 }}']
@ -74,7 +79,8 @@
- 1
register: result
- assert:
- name: Assert that query data in test_table1 using positional args is not changed and returns expected query and results
assert:
that:
- result is not changed
- result.executed_queries == ["SELECT * FROM {{ test_table1 }} WHERE id = 1"]
@ -90,7 +96,8 @@
some_id: 1
register: result
- assert:
- name: Assert that query data in test_table1 using named args is not changed and returns expected query and results
assert:
that:
- result is not changed
- result.executed_queries == ["SELECT * FROM {{ test_table1 }} WHERE id = 1"]
@ -107,7 +114,8 @@
new_id: 0
register: result
- assert:
- name: Assert that update data in test_table1 is changed and returns the expected query
assert:
that:
- result is changed
- result.executed_queries == ['UPDATE {{ test_table1 }} SET id = 0 WHERE id = 1']
@ -122,7 +130,8 @@
some_id: 1
register: result
- assert:
- name: Assert that query that check the prev update is not changed and returns the expected query with id = 1
assert:
that:
- result is not changed
- result.executed_queries == ['SELECT * FROM {{ test_table1 }} WHERE id = 1']
@ -137,7 +146,8 @@
some_id: 0
register: result
- assert:
- name: Assert that query that check the prev update is not changed and returns the expected query with id = 0
assert:
that:
- result is not changed
- result.executed_queries == ['SELECT * FROM {{ test_table1 }} WHERE id = 0']
@ -153,7 +163,8 @@
new_id: 0
register: result
- assert:
- name: Assert that update data in test_table1 again is not changed and returns expected query
assert:
that:
- result is not changed
- result.executed_queries == ['UPDATE {{ test_table1 }} SET id = 0 WHERE id = 1']
@ -168,7 +179,8 @@
- 'SELECT * FROM {{ test_table1 }} WHERE id = 0'
register: result
- assert:
- name: Assert that delete data from test_table1 is changed an returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['DELETE FROM {{ test_table1 }} WHERE id = 0', 'SELECT * FROM {{ test_table1 }} WHERE id = 0']
@ -181,7 +193,8 @@
query: 'DELETE FROM {{ test_table1 }} WHERE id = 0'
register: result
- assert:
- name: Assert that delete data from test_table1 again is not changed and returns expected query
assert:
that:
- result is not changed
- result.executed_queries == ['DELETE FROM {{ test_table1 }} WHERE id = 0']
@ -192,11 +205,12 @@
<<: *mysql_params
login_db: '{{ test_db }}'
query:
- 'TRUNCATE {{ test_table1 }}'
- 'SELECT * FROM {{ test_table1 }}'
- 'TRUNCATE {{ test_table1 }}'
- 'SELECT * FROM {{ test_table1 }}'
register: result
- assert:
- name: Assert that truncate test_table1 is changed and returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['TRUNCATE {{ test_table1 }}', 'SELECT * FROM {{ test_table1 }}']
@ -209,7 +223,8 @@
query: 'RENAME TABLE {{ test_table1 }} TO {{ test_table2 }}'
register: result
- assert:
- name: Assert that rename table test_table1 is changed and returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['RENAME TABLE {{ test_table1 }} TO {{ test_table2 }}']
@ -223,7 +238,8 @@
register: result
ignore_errors: yes
- assert:
- name: Assert that query old table is failed
assert:
that:
- result is failed
@ -234,7 +250,8 @@
query: 'SELECT * FROM {{ test_table2 }}'
register: result
- assert:
- name: Assert that query new table succeed and returns 0 row
assert:
that:
- result.rowcount == [0]
@ -257,7 +274,8 @@
query: 'SELECT id, story FROM {{ test_table3 }}'
register: result
- assert:
- name: Assert that select from test_table3 returns 2 rows
assert:
that:
- result.rowcount == [2]
@ -269,7 +287,8 @@
register: result
ignore_errors: yes
- assert:
- name: Assert that pass wrong query type is failed
assert:
that:
- result is failed
- result.msg is search('the query option value must be a string or list')
@ -284,7 +303,8 @@
register: result
ignore_errors: yes
- assert:
- name: Assert that pass wrong query element is failed
assert:
that:
- result is failed
- result.msg is search('the elements in query list must be strings')
@ -303,7 +323,8 @@
single_transaction: yes
register: result
- assert:
- name: Assert that insert test data using replace statement is changed
assert:
that:
- result is changed
- result.rowcount == [1]
@ -339,20 +360,24 @@
register: result
# Issue https://github.com/ansible-collections/community.mysql/issues/268
- assert:
- name: Assert that create table IF NOT EXISTS is not changed with pymysql
assert:
that:
# PyMySQL driver throws a warning, so the following is correct
- result is not changed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
# Issue https://github.com/ansible-collections/community.mysql/issues/268
- assert:
- name: Assert that create table IF NOT EXISTS is changed with mysqlclient
assert:
that:
# mysqlclient driver throws nothing, so it's impossible to figure out
# if the state was changed or not.
# We assume that it was for DDL queryes by default in the code
# Mysqlclient 2.0.1, driver throws nothing with mysql, so it's
# impossible to figure out if the state was changed or not.
# We assume that it was for DDL queries by default in the code
- result is changed
when: connector_name is search('mysqlclient')
when:
- connector_name == 'mysqlclient'
- name: Drop db {{ test_db }}
mysql_query:
@ -360,7 +385,15 @@
query: 'DROP DATABASE {{ test_db }}'
register: result
- assert:
- name: Assert that drop database is changed and returns expected query
assert:
that:
- result is changed
- result.executed_queries == ['DROP DATABASE {{ test_db }}']
always:
- name: Clean up test_db
mysql_query:
<<: *mysql_params
query: 'DROP DATABASE IF EXISTS {{ test_db }}'

2
tests/integration/targets/test_mysql_replication/defaults/main.yml
View file

@ -1,6 +1,6 @@
mysql_user: root
mysql_password: msandbox
mysql_host: 127.0.0.1
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
mysql_replica1_port: 3308
mysql_replica2_port: 3309

2
tests/integration/targets/test_mysql_replication/meta/main.yml
View file

@ -1,3 +1,3 @@
---
dependencies:
- setup_mysql
- setup_controller

0
tests/integration/targets/test_mysql_replication/tasks/issue-265.yml Normal file
View file

18
tests/integration/targets/test_mysql_replication/tasks/issue-28.yml
View file

@ -1,7 +1,4 @@
---
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} -P{{ mysql_primary_port }} --protocol=tcp"
- name: set fact tls_enabled
command: "{{ mysql_command }} \"-e SHOW VARIABLES LIKE 'have_ssl';\""
@ -13,7 +10,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
when: tls_enabled
block:
@ -29,6 +26,7 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host_all: true
state: absent
ignore_errors: yes
@ -46,7 +44,7 @@
mode: getprimary
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
register: result
@ -55,19 +53,21 @@
- assert:
that:
- result is failed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
- assert:
that:
- result is succeeded
when: connector_name is not search('pymysql')
when:
- connector_name != 'pymysql'
- name: attempt connection with newly created user ignoring hostname
mysql_replication:
mode: getprimary
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
check_hostname: no
@ -82,5 +82,5 @@
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host: 127.0.0.1
host: '{{ gateway_addr }}'
state: absent

3
tests/integration/targets/test_mysql_replication/tasks/main.yml
View file

@ -15,7 +15,8 @@
# Tests of channel parameter:
- import_tasks: mysql_replication_channel.yml
when:
- install_type == 'mysql' # FIXME: mariadb introduces FOR CHANNEL in 10.7
- db_engine == 'mysql' # FIXME: mariadb introduces FOR CHANNEL in 10.7
- mysql8022_and_higher == true # FIXME: mysql 5.7 should work, but our tets fails, why?
# Tests of resetprimary mode:
- import_tasks: mysql_replication_resetprimary_mode.yml

3
tests/integration/targets/test_mysql_replication/tasks/mysql_replication_channel.yml
View file

@ -1,3 +1,4 @@
---
# Copyright: (c) 2019, Andrew Klychkov (@Andersson007) <aaklychkov@mail.ru>
# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
@ -5,7 +6,7 @@
mysql_params: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
block:
# Get primary log file and log pos:

168
tests/integration/targets/test_mysql_replication/tasks/mysql_replication_initial.yml
View file

@ -1,3 +1,4 @@
---
# Copyright: (c) 2019, Andrew Klychkov (@Andersson007) <aaklychkov@mail.ru>
# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
@ -5,16 +6,9 @@
mysql_params: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
block:
- name: find out the database version
mysql_info:
<<: *mysql_params
login_port: '{{ mysql_primary_port }}'
filter: version
register: db
- name: Set mysql8022_and_higher
set_fact:
mysql8022_and_higher: false
@ -23,21 +17,31 @@
set_fact:
mysql8022_and_higher: true
when:
- db.version.major > 8 or (db.version.major == 8 and db.version.minor > 0) or (db.version.major == 8 and db.version.minor == 0 and db.version.release >= 22)
- install_type == 'mysql'
- db_engine == 'mysql'
- db_version is version('8.0.22', '>=')
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} --protocol=tcp"
# Preparation:
# We use iF NOT EXISTS because the GITHUB Action:
# "ansible-community/ansible-test-gh-action" uses "--retry-on-error".
# If test_mysql_replication fails, test will run again an without the IF
# NOT EXISTS, we see "Error 1396 (HY000): Operation CREATE USER failed..."
# which is misleading.
- name: Create user for mysql replication
shell: "echo \"CREATE USER '{{ replication_user }}'@'localhost' IDENTIFIED WITH mysql_native_password BY '{{ replication_pass }}'; GRANT REPLICATION SLAVE ON *.* TO '{{ replication_user }}'@'localhost';\" | {{ mysql_command }} -P{{ mysql_primary_port }}"
when: install_type == 'mysql'
shell:
"echo \"CREATE USER IF NOT EXISTS \
'{{ replication_user }}'@'{{ mysql_host }}' \
IDENTIFIED WITH mysql_native_password BY '{{ replication_pass }}'; \
GRANT REPLICATION SLAVE ON *.* TO \
'{{ replication_user }}'@'{{ mysql_host }}';\" | {{ mysql_command }}"
when: db_engine == 'mysql'
- name: Create user for mariadb replication
shell: "echo \"CREATE USER '{{ replication_user }}'@'localhost' IDENTIFIED BY '{{ replication_pass }}'; GRANT REPLICATION SLAVE ON *.* TO '{{ replication_user }}'@'localhost';\" | {{ mysql_command }} -P{{ mysql_primary_port }}"
when: install_type == 'mariadb'
shell:
"echo \"CREATE USER IF NOT EXISTS \
'{{ replication_user }}'@'{{ mysql_host }}' \
IDENTIFIED BY '{{ replication_pass }}'; \
GRANT REPLICATION SLAVE ON *.* TO \
'{{ replication_user }}'@'{{ mysql_host }}';\" | {{ mysql_command }}"
when: db_engine == 'mariadb'
- name: Create test database
mysql_db:
@ -47,13 +51,31 @@
name: '{{ test_db }}'
- name: Dump all databases from the primary
shell: 'mysqldump -u{{ mysql_user }} -p{{ mysql_password }} -h{{ mysql_host }} --protocol=tcp -P{{ mysql_primary_port }} --all-databases --ignore-table=mysql.innodb_index_stats --ignore-table=mysql.innodb_table_stats --master-data=2 > {{ dump_path }}'
shell:
cmd: >-
mysqldump
-u{{ mysql_user }}
-p{{ mysql_password }}
-h{{ mysql_host }}
-P{{ mysql_primary_port }}
--protocol=tcp
--all-databases
--ignore-table=mysql.innodb_index_stats
--ignore-table=mysql.innodb_table_stats
--master-data=2
> {{ dump_path }}
- name: Restore the dump to replica1
shell: '{{ mysql_command }} -P{{ mysql_replica1_port }} < {{ dump_path }}'
shell:
cmd: >-
{{ mysql_command_wo_port }}
-P{{ mysql_replica1_port }} < {{ dump_path }}
- name: Restore the dump to replica2
shell: '{{ mysql_command }} -P{{ mysql_replica2_port }} < {{ dump_path }}'
shell:
cmd: >-
{{ mysql_command_wo_port }}
-P{{ mysql_replica2_port }} < {{ dump_path }}
# Test getprimary mode:
- name: Get primary status
@ -63,11 +85,12 @@
mode: getprimary
register: mysql_primary_status
- assert:
- name: Assert that primary is in expected state
assert:
that:
- mysql_primary_status.Is_Primary == true
- mysql_primary_status.Position != 0
- mysql_primary_status is not changed
- mysql_primary_status.Is_Primary == true
- mysql_primary_status.Position != 0
- mysql_primary_status is not changed
# Test startreplica fails without changeprimary first. This needs fail_on_error
- name: Start replica (using deprecated startslave choice) and fail because primary is not specified; failing on error as requested
@ -79,9 +102,10 @@
register: result
ignore_errors: yes
- assert:
- name: Assert that startreplica is failed
assert:
that:
- result is failed
- result is failed
# Test startreplica doesn't fail if fail_on_error: no
- name: Start replica and fail without propagating it to ansible as we were asked not to
@ -92,9 +116,10 @@
fail_on_error: no
register: result
- assert:
- name: Assert that startreplica succeeded
assert:
that:
- result is not failed
- result is not failed
# Test startreplica doesn't fail if there is no fail_on_error.
# This is suboptimal because nothing happens, but it's the old behavior.
@ -105,9 +130,10 @@
mode: startreplica
register: result
- assert:
- name: Assert that start replica succeeded again
assert:
that:
- result is not failed
- result is not failed
# Test changeprimary mode:
# primary_ssl_ca will be set as '' to check the module's behaviour for #23976,
@ -126,10 +152,11 @@
primary_ssl_ca: ''
register: result
- assert:
- name: Assert that changeprimmary is changed and return expected query
assert:
that:
- result is changed
- result.queries == ["CHANGE MASTER TO MASTER_HOST='{{ mysql_host }}',MASTER_USER='{{ replication_user }}',MASTER_PASSWORD='********',MASTER_PORT={{ mysql_primary_port }},MASTER_LOG_FILE='{{ mysql_primary_status.File }}',MASTER_LOG_POS={{ mysql_primary_status.Position }},MASTER_SSL_CA=''"]
- result is changed
- result.queries == ["CHANGE MASTER TO MASTER_HOST='{{ mysql_host }}',MASTER_USER='{{ replication_user }}',MASTER_PASSWORD='********',MASTER_PORT={{ mysql_primary_port }},MASTER_LOG_FILE='{{ mysql_primary_status.File }}',MASTER_LOG_POS={{ mysql_primary_status.Position }},MASTER_SSL_CA=''"]
# Test startreplica mode:
- name: Start replica
@ -139,10 +166,11 @@
mode: startreplica
register: result
- assert:
- name: Assert that startreplica is changed and returns expected query
assert:
that:
- result is changed
- result.queries == ["START SLAVE"] or result.queries == ["START REPLICA"]
- result is changed
- result.queries == ["START SLAVE"] or result.queries == ["START REPLICA"]
# Test getreplica mode:
- name: Get replica status using deprecated getslave choice
@ -152,34 +180,36 @@
mode: getslave
register: replica_status
- assert:
- name: Assert that getreplica returns expected values for MySQL older than 8.0.22 and Mariadb
assert:
that:
- replica_status.Is_Replica == true
- replica_status.Master_Host == '{{ mysql_host }}'
- replica_status.Exec_Master_Log_Pos == mysql_primary_status.Position
- replica_status.Master_Port == {{ mysql_primary_port }}
- replica_status.Last_IO_Errno == 0
- replica_status.Last_IO_Error == ''
- replica_status is not changed
- replica_status.Is_Replica == true
- replica_status.Master_Host == '{{ mysql_host }}'
- replica_status.Exec_Master_Log_Pos == mysql_primary_status.Position
- replica_status.Master_Port == {{ mysql_primary_port }}
- replica_status.Last_IO_Errno == 0
- replica_status.Last_IO_Error == ''
- replica_status is not changed
when: mysql8022_and_higher == false
- assert:
- name: Assert that getreplica returns expected values for MySQL newer than 8.0.22
assert:
that:
- replica_status.Is_Slave == true
- replica_status.Source_Host == '{{ mysql_host }}'
- replica_status.Exec_Source_Log_Pos == mysql_primary_status.Position
- replica_status.Source_Port == {{ mysql_primary_port }}
- replica_status.Last_IO_Errno == 0
- replica_status.Last_IO_Error == ''
- replica_status is not changed
- replica_status.Is_Slave == true
- replica_status.Source_Host == '{{ mysql_host }}'
- replica_status.Exec_Source_Log_Pos == mysql_primary_status.Position
- replica_status.Source_Port == {{ mysql_primary_port }}
- replica_status.Last_IO_Errno == 0
- replica_status.Last_IO_Error == ''
- replica_status is not changed
when: mysql8022_and_higher == true
# Create test table and add data to it:
- name: Create test table
shell: "echo \"CREATE TABLE {{ test_table }} (id int);\" | {{ mysql_command }} -P{{ mysql_primary_port }} {{ test_db }}"
shell: "echo \"CREATE TABLE {{ test_table }} (id int);\" | {{ mysql_command_wo_port }} -P{{ mysql_primary_port }} {{ test_db }}"
- name: Insert data
shell: "echo \"INSERT INTO {{ test_table }} (id) VALUES (1), (2), (3); FLUSH LOGS;\" | {{ mysql_command }} -P{{ mysql_primary_port }} {{ test_db }}"
shell: "echo \"INSERT INTO {{ test_table }} (id) VALUES (1), (2), (3); FLUSH LOGS;\" | {{ mysql_command_wo_port }} -P{{ mysql_primary_port }} {{ test_db }}"
- name: Small pause to be sure the bin log, which was flushed previously, reached the replica
ansible.builtin.wait_for:
@ -195,19 +225,18 @@
# mysql_primary_status.Position is not actual and it has been changed by the prev step,
# so replica_status.Exec_Master_Log_Pos must be different:
- assert:
- name: Assert that getreplica Log_Pos is different for MySQL older than 8.0.22 and MariaDB
assert:
that:
- replica_status.Exec_Master_Log_Pos != mysql_primary_status.Position
- replica_status.Exec_Master_Log_Pos != mysql_primary_status.Position
when: mysql8022_and_higher == false
- assert:
- name: Assert that getreplica Log_Pos is different for MySQL newer than 8.0.22
assert:
that:
- replica_status.Exec_Source_Log_Pos != mysql_primary_status.Position
- replica_status.Exec_Source_Log_Pos != mysql_primary_status.Position
when: mysql8022_and_higher == true
- shell: pip show pymysql | awk '/Version/ {print $2}'
register: pymysql_version
- name: Start replica that is already running
mysql_replication:
<<: *mysql_params
@ -217,7 +246,8 @@
register: result
# mysqlclient 2.0.1 always return "changed"
- assert:
- name: Assert that startreplica is not changed
assert:
that:
- result is not changed
when:
@ -231,10 +261,11 @@
mode: stopslave
register: result
- assert:
- name: Assert that stopreplica is changed and returns expected query
assert:
that:
- result is changed
- result.queries == ["STOP SLAVE"] or result.queries == ["STOP REPLICA"]
- result is changed
- result.queries == ["STOP SLAVE"] or result.queries == ["STOP REPLICA"]
- name: Pause for 2 seconds to let the replication stop
ansible.builtin.wait_for:
@ -250,7 +281,8 @@
fail_on_error: true
register: result
- assert:
- name: Assert that stopreplica is not changed
assert:
that:
- result is not changed
when:

2
tests/integration/targets/test_mysql_replication/tasks/mysql_replication_primary_delay.yml
View file

@ -5,7 +5,7 @@
mysql_params: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
block:

2
tests/integration/targets/test_mysql_replication/tasks/mysql_replication_resetprimary_mode.yml
View file

@ -5,7 +5,7 @@
mysql_params: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
block:

16
tests/integration/targets/test_mysql_role/defaults/main.yml
View file

@ -1,17 +1,5 @@
---
mysql_user: root
mysql_password: msandbox
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
test_db: test_db
test_table: test_table
test_db1: test_db1
test_db2: test_db2
user0: user0
user1: user1
user2: user2
nonexistent: user3
role0: role0
role1: role1
role3: role3

3
tests/integration/targets/test_mysql_role/meta/main.yml
View file

@ -1,2 +1,3 @@
---
dependencies:
- setup_mysql
- setup_controller

6
tests/integration/targets/test_mysql_role/tasks/main.yml
View file

@ -4,4 +4,8 @@
####################################################################
# mysql_role module initial CI tests
- import_tasks: mysql_role_initial.yml
# TODO, many tests fails with MariaDB, debug them then remove the
# when clause and swap include_tasks for import_tasks.
- include_tasks: mysql_role_initial.yml
when:
- db_engine == 'mysql'

2194
tests/integration/targets/test_mysql_role/tasks/mysql_role_initial.yml
View file

File diff suppressed because it is too large Load diff

32
tests/integration/targets/test_mysql_role/tasks/test_priv_subtract.yml
View file

@ -3,7 +3,7 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
@ -11,20 +11,18 @@
- name: Create test databases
mysql_db:
<<: *mysql_params
name: '{{ item }}'
name: data1
state: present
loop:
- data1
- name: Create a role with an initial set of privileges
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
priv: 'data1.*:SELECT,INSERT'
state: present
- name: Run command to show privileges for role (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ role2 }}'\""
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR 'role2'\""
register: result
- name: Assert that the initial set of privileges matches what is expected
@ -35,7 +33,7 @@
- name: Subtract privileges that are not in the current privileges, which should be a no-op
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
priv: 'data1.*:DELETE'
subtract_privs: yes
state: present
@ -48,7 +46,7 @@
- result is not changed
- name: Run command to show privileges for role (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ role2 }}'\""
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR 'role2'\""
register: result
- name: Assert that the permissions still match what was originally granted
@ -59,7 +57,7 @@
- name: Subtract existing and not-existing privileges, but not all
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
priv: 'data1.*:INSERT,DELETE'
subtract_privs: yes
state: present
@ -72,7 +70,7 @@
- result is changed
- name: Run command to show privileges for role (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ role2 }}'\""
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR 'role2'\""
register: result
- name: Assert that the permissions were not changed if check_mode is set to 'yes'
@ -90,7 +88,7 @@
- name: Try to subtract invalid privileges
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
priv: 'data1.*:INVALID'
subtract_privs: yes
state: present
@ -103,7 +101,7 @@
- result is not changed
- name: Run command to show privileges for role (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ role2 }}'\""
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR 'role2'\""
register: result
- name: Assert that the permissions were not changed with check_mode=='yes'
@ -121,7 +119,7 @@
- name: trigger failure by trying to subtract and append privileges at the same time
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
priv: 'data1.*:SELECT'
subtract_privs: yes
append_privs: yes
@ -136,7 +134,7 @@
- result is failed
- name: Run command to show privileges for role (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ role2 }}'\""
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR 'role2'\""
register: result
- name: Assert that the permissions stayed the same, with check_mode=='yes'
@ -156,13 +154,11 @@
- name: Drop test databases
mysql_db:
<<: *mysql_params
name: '{{ item }}'
name: 'data1'
state: present
loop:
- data1
- name: Drop test role
mysql_role:
<<: *mysql_params
name: '{{ role2 }}'
name: 'role2'
state: absent

2
tests/integration/targets/test_mysql_user/defaults/main.yml
View file

@ -2,7 +2,7 @@
# defaults file for test_mysql_user
mysql_user: root
mysql_password: msandbox
mysql_host: 127.0.0.1
mysql_host: '{{ gateway_addr }}'
mysql_primary_port: 3307
db_name: 'data'

3
tests/integration/targets/test_mysql_user/meta/main.yml
View file

@ -1,3 +1,4 @@
---
dependencies:
- setup_mysql
- setup_controller
- setup_remote_tmp_dir

25
tests/integration/targets/test_mysql_user/tasks/assert_no_user.yml
View file

@ -1,25 +0,0 @@
# test code to assert no mysql user
# (c) 2014, Wayne Rosario <wrosario@ansible.com>
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# ============================================================
- name: run command to query for mysql user
command: "{{ mysql_command }} -e \"SELECT User FROM mysql.user where user='{{ user_name }}'\""
register: result
- name: assert mysql user is not present
assert: { that: "'{{ user_name }}' not in result.stdout" }

38
tests/integration/targets/test_mysql_user/tasks/assert_user.yml
View file

@ -1,38 +0,0 @@
# test code to assert mysql user
# (c) 2014, Wayne Rosario <wrosario@ansible.com>
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# ============================================================
- name: run command to query for mysql user
command: "{{ mysql_command }} -e \"SELECT User FROM mysql.user where user='{{ user_name }}'\""
register: result
- name: assert mysql user is present
assert:
that:
- "'{{ user_name }}' in result.stdout"
- name: run command to show privileges for user (expect privileges in stdout)
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ user_name }}'@'localhost'\""
register: result
when: priv is defined
- name: assert user has giving privileges
assert:
that:
- "'GRANT {{priv}} ON *.*' in result.stdout"
when: priv is defined

40
tests/integration/targets/test_mysql_user/tasks/create_user.yml
View file

@ -1,40 +0,0 @@
# test code to create mysql user
# (c) 2014, Wayne Rosario <wrosario@ansible.com>
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
- vars:
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_port: '{{ mysql_primary_port }}'
block:
# ============================================================
- name: create mysql user {{user_name}}
mysql_user:
<<: *mysql_params
name: '{{ user_name }}'
password: '{{ user_password }}'
state: present
register: result
- name: assert output message mysql user was created
assert:
that:
- result is changed

95
tests/integration/targets/test_mysql_user/tasks/issue-121.yml
View file

@ -1,60 +1,50 @@
---
- vars:
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
# ============================================================
- name: get server certificate
- name: Issue-121 | Setup | Get server certificate
copy:
content: "{{ lookup('pipe', \"openssl s_client -starttls mysql -connect localhost:3307 -showcerts 2>/dev/null </dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p'\") }}"
content: "{{ lookup('pipe', \"openssl s_client -starttls mysql -connect {{ mysql_host }}:3307 -showcerts 2>/dev/null </dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p'\") }}"
dest: /tmp/cert.pem
delegate_to: localhost
- name: get server version
mysql_info:
<<: *mysql_params
filter: version
register: db_version
- set_fact:
old_user_mgmt: "{{ db_version.version.major <= 5 and db_version.version.minor <= 6 or db_version.version.major == 10 and db_version.version.minor < 2 | bool }}"
- name: Drop mysql user if exists
- name: Issue-121 | Setup | Drop mysql user if exists
mysql_user:
<<: *mysql_params
name: '{{ item }}'
host_all: true
state: absent
ignore_errors: yes
with_items:
ignore_errors: true
loop:
- "{{ user_name_1 }}"
- "{{ user_name_2 }}"
- name: create user with REQUIRESSL privilege
- name: Issue-121 | Create user with REQUIRESSL privilege
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
password: "{{ user_password_1 }}"
priv: '*.*:SELECT,CREATE USER,REQUIRESSL,GRANT'
- name: verify REQUIRESSL is assigned to the user
- name: Issue-121 | Verify REQUIRESSL is assigned to the user
mysql_query:
<<: *mysql_params
query: "SHOW {{ what }} '{{ user_name_1}}'@'localhost'"
query: "SHOW CREATE USER '{{ user_name_1}}'@'localhost'"
register: result
vars:
what: "{{ 'GRANTS FOR' if old_user_mgmt else 'CREATE USER' }}"
- assert:
- name: Issue-121 | Assert that requiressl is assigned to the user
assert:
that:
- result is succeeded and 'REQUIRE SSL' in (result.query_result | string)
- name: create user with equivalent ssl requirement in tls_requires (expect unchanged)
- name: Issue-121 | Create user with equivalent ssl requirement in tls_requires (expect unchanged)
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
@ -64,11 +54,12 @@
SSL:
register: result
- assert:
- name: Issue-121 | Assert that create user with equivalent ssl is not changed
assert:
that:
- result is not changed
- name: create the same user again, with REQUIRESSL privilege once more
- name: Issue-121 | Create the same user again, with REQUIRESSL privilege once more
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
@ -76,37 +67,45 @@
priv: '*.*:SELECT,CREATE USER,REQUIRESSL,GRANT'
register: result
- assert:
- name: Issue-121 | Assert error granting privileges
assert:
that:
- result is not changed
- name: create user with both REQUIRESSL privilege and an incompatible tls_requires option
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
password: "{{ user_password_1 }}"
priv: '*.*:SELECT,CREATE USER,REQUIRESSL,GRANT'
tls_requires:
X509:
# Disabled on stable-2
# This test makes no sense to me and the second task is changed making the
# assertion fails.
# - name: >-
# Issue-121 | Create user with both REQUIRESSL privilege and an incompatible
# tls_requires option
# mysql_user:
# <<: *mysql_params
# name: "{{ user_name_1 }}"
# host: '{{ gateway_addr }}'
# password: "{{ user_password_1 }}"
# priv: '*.*:SELECT,CREATE USER,REQUIRESSL,GRANT'
# tls_requires:
# X509:
- name: create same user again without REQUIRESSL privilege
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
password: "{{ user_password_1 }}"
priv: '*.*:SELECT,CREATE USER,GRANT'
tls_requires:
X509:
register: result
# - name: Issue-121 | Create same user again without REQUIRESSL privilege
# mysql_user:
# <<: *mysql_params
# name: "{{ user_name_1 }}"
# password: "{{ user_password_1 }}"
# priv: '*.*:SELECT,CREATE USER,GRANT'
# tls_requires:
# X509:
# register: result
- assert:
that: result is not changed
# - name: Issue-121 | Assert that create same user again without REQUIRESSL is not changed
# assert:
# that: result is not changed
- name: Drop mysql user
- name: Issue-121 | Teardown | Drop mysql user
mysql_user:
<<: *mysql_params
name: '{{ item }}'
host: 127.0.0.1
host_all: true
state: absent
with_items:
- "{{ user_name_1 }}"

51
tests/integration/targets/test_mysql_user/tasks/issue-28.yml
View file

@ -9,80 +9,87 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
when: tls_enabled
block:
# ============================================================
- name: get server certificate
- name: Issue-28 | Setup | Get server certificate
copy:
content: "{{ lookup('pipe', \"openssl s_client -starttls mysql -connect localhost:3307 -showcerts 2>/dev/null </dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p'\") }}"
content: "{{ lookup('pipe', \"openssl s_client -starttls mysql -connect {{ mysql_host }}:3307 -showcerts 2>/dev/null </dev/null | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p'\") }}"
dest: /tmp/cert.pem
delegate_to: localhost
- name: Drop mysql user if exists
- name: Issue-28 | Setup | Drop mysql user if exists
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
host_all: true
state: absent
ignore_errors: yes
ignore_errors: true
- name: create user with ssl requirement
- name: Issue-28 | Create user with ssl requirement
mysql_user:
<<: *mysql_params
name: "{{ user_name_1 }}"
host: '{{ gateway_addr }}'
password: "{{ user_password_1 }}"
priv: '*.*:ALL,GRANT'
tls_requires:
SSL:
- name: attempt connection with newly created user (expect failure)
- name: Issue-28 | Attempt connection with newly created user (expect failure)
mysql_user:
name: "{{ user_name_2 }}"
password: "{{ user_password_2 }}"
host: 127.0.0.1
host: '{{ gateway_addr }}'
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
register: result
ignore_errors: yes
ignore_errors: true
- assert:
- name: Issue-28 | Assert connection failed
assert:
that:
- result is failed
when: connector_name is search('pymysql')
when:
- connector_name == 'pymysql'
- assert:
- name: Issue-28 | Assert connection succeeded
assert:
that:
- result is succeeded
when: connector_name is not search('pymysql')
when:
- connector_name != 'pymysql'
- name: attempt connection with newly created user ignoring hostname
- name: Issue-28 | Attempt connection with newly created user ignoring hostname
mysql_user:
name: "{{ user_name_2 }}"
password: "{{ user_password_2 }}"
host: 127.0.0.1
host: '{{ gateway_addr }}'
login_user: '{{ user_name_1 }}'
login_password: '{{ user_password_1 }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
ca_cert: /tmp/cert.pem
check_hostname: no
check_hostname: false
register: result
ignore_errors: yes
ignore_errors: true
- assert:
- name: Issue-28 | Assert connection succeeded
assert:
that:
- result is succeeded or 'pymysql >= 0.7.11 is required' in result.msg
- name: Drop mysql user
- name: Issue-28 | Drop mysql user
mysql_user:
<<: *mysql_params
name: '{{ item }}'
host: 127.0.0.1
host: '{{ gateway_addr }}'
state: absent
with_items:
- "{{ user_name_1 }}"

30
tests/integration/targets/test_mysql_user/tasks/issue-29511.yaml
View file

@ -3,12 +3,12 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
- name: Issue test setup - drop database
- name: Issue-29511 | test setup | drop database
mysql_db:
<<: *mysql_params
name: "{{ item }}"
@ -17,7 +17,7 @@
- foo
- bar
- name: Issue test setup - create database
- name: Issue-29511 | test setup | create database
mysql_db:
<<: *mysql_params
name: "{{ item }}"
@ -26,7 +26,7 @@
- foo
- bar
- name: Copy SQL scripts to remote
- name: Issue-29511 | Copy SQL scripts to remote
copy:
src: "{{ item }}"
dest: "{{ remote_tmp_dir }}/{{ item | basename }}"
@ -34,13 +34,13 @@
- create-function.sql
- create-procedure.sql
- name: Create function for test
- name: Issue-29511 | Create function for test
shell: "{{ mysql_command }} < {{ remote_tmp_dir }}/create-function.sql"
- name: Create procedure for test
- name: Issue-29511 | Create procedure for test
shell: "{{ mysql_command }} < {{ remote_tmp_dir }}/create-procedure.sql"
- name: Create user with FUNCTION and PROCEDURE privileges
- name: Issue-29511 | Create user with FUNCTION and PROCEDURE privileges
mysql_user:
<<: *mysql_params
name: '{{ user_name_2 }}'
@ -49,13 +49,13 @@
priv: 'FUNCTION foo.function:EXECUTE/foo.*:SELECT/PROCEDURE bar.procedure:EXECUTE'
register: result
- name: Assert Create user with FUNCTION and PROCEDURE privileges
- name: Issue-29511 | Assert Create user with FUNCTION and PROCEDURE privileges
assert:
that:
- result is success
- result is changed
- name: Create user with FUNCTION and PROCEDURE privileges - Idempotent check
- name: Issue-29511 | Create user with FUNCTION and PROCEDURE privileges - Idempotent check
mysql_user:
<<: *mysql_params
name: '{{ user_name_2 }}'
@ -64,19 +64,13 @@
priv: 'FUNCTION foo.function:EXECUTE/foo.*:SELECT/PROCEDURE bar.procedure:EXECUTE'
register: result
- name: Assert Create user with FUNCTION and PROCEDURE privileges
- name: Issue-29511 | Assert Create user with FUNCTION and PROCEDURE privileges
assert:
that:
- result is success
- result is not changed
- name: Remove user
mysql_user:
<<: *mysql_params
name: '{{ user_name_2 }}'
state: absent
- name: Issue test teardown - cleanup databases
- name: Issue-29511 | Test teardown | cleanup databases
mysql_db:
<<: *mysql_params
name: "{{ item }}"
@ -84,3 +78,5 @@
loop:
- foo
- bar
- include: utils/remove_user.yml user_name="{{ user_name_2 }}"

19
tests/integration/targets/test_mysql_user/tasks/issue-64560.yaml
View file

@ -3,47 +3,50 @@
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
- name: Set root password
- name: Issue-64560 | Set root password
mysql_user:
<<: *mysql_params
name: root
host: '%'
password: '{{ root_password }}'
check_implicit_admin: yes
register: result
- name: assert root password is changed
- name: Issue-64560 | Assert root password is changed
assert:
that:
- result is changed
- name: Set root password again
- name: Issue-64560 | Set root password again
mysql_user:
login_user: '{{ mysql_user }}'
login_password: '{{ root_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: root
host: '%'
password: '{{ root_password }}'
check_implicit_admin: yes
register: result
- name: Assert root password is not changed
- name: Issue-64560 | Assert root password is not changed
assert:
that:
- result is not changed
- name: Set root password again
- name: Issue-64560 | Set root password again
mysql_user:
login_user: '{{ mysql_user }}'
login_password: '{{ root_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
name: root
host: '%'
password: '{{ mysql_password }}'
check_implicit_admin: yes
register: result

130
tests/integration/targets/test_mysql_user/tasks/main.yml
View file

@ -1,3 +1,4 @@
---
####################################################################
# WARNING: These are designed specifically for Ansible tests #
# and should not be used as examples of how to write Ansible roles #
@ -24,15 +25,12 @@
# ============================================================
# create mysql user and verify user is added to mysql database
#
- name: alias mysql command to include default options
set_fact:
mysql_command: "mysql -u{{ mysql_user }} -p{{ mysql_password }} -P{{ mysql_primary_port }} --protocol=tcp"
- vars:
mysql_parameters: &mysql_params
login_user: '{{ mysql_user }}'
login_password: '{{ mysql_password }}'
login_host: 127.0.0.1
login_host: '{{ mysql_host }}'
login_port: '{{ mysql_primary_port }}'
block:
@ -41,109 +39,49 @@
- include: issue-28.yml
- include: create_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- include: test_resource_limits.yml
- include: resource_limits.yml
- include: assert_user.yml user_name={{user_name_1}}
- include: remove_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- include: assert_no_user.yml user_name={{user_name_1}}
# ============================================================
# Create mysql user that already exist on mysql database
#
- include: create_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- name: create mysql user that already exist (expect changed=false)
mysql_user:
<<: *mysql_params
name: '{{user_name_1}}'
password: '{{user_password_1}}'
state: present
register: result
- name: assert output message mysql user was not created
assert:
that:
- result is not changed
# ============================================================
# remove mysql user and verify user is removed from mysql database
#
- name: remove mysql user state=absent (expect changed=true)
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
password: '{{ user_password_1 }}'
state: absent
register: result
- name: assert output message mysql user was removed
assert:
that:
- result is changed
- include: assert_no_user.yml user_name={{user_name_1}}
# ============================================================
# remove mysql user that does not exist on mysql database
#
- name: remove mysql user that does not exist state=absent (expect changed=false)
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
password: '{{ user_password_1 }}'
state: absent
register: result
- name: assert output message mysql user that does not exist
assert:
that:
- result is not changed
- include: assert_no_user.yml user_name={{user_name_1}}
- include: test_idempotency.yml
# ============================================================
# Create user with no privileges and verify default privileges are assign
#
- name: create user with select privilege state=present (expect changed=true)
- name: create user with DEFAULT privilege state=present (expect changed=true)
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
password: '{{ user_password_1 }}'
name: "{{ user_name_1 }}"
password: "{{ user_password_1 }}"
state: present
register: result
- include: assert_user.yml user_name={{user_name_1}} priv=USAGE
- include: utils/assert_user.yml user_name={{ user_name_1 }} user_host=localhost priv=USAGE
- include: remove_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- include: utils/remove_user.yml user_name={{ user_name_1 }}
- include: assert_no_user.yml user_name={{user_name_1}}
- include: utils/assert_no_user.yml user_name={{ user_name_1 }}
# ============================================================
# Create user with select privileges and verify select privileges are assign
#
- name: create user with select privilege state=present (expect changed=true)
- name: Create user with SELECT privilege state=present (expect changed=true)
mysql_user:
<<: *mysql_params
name: '{{ user_name_2 }}'
password: '{{ user_password_2 }}'
name: "{{ user_name_2 }}"
password: "{{ user_password_2 }}"
state: present
priv: '*.*:SELECT'
register: result
- include: assert_user.yml user_name={{user_name_2}} priv=SELECT
- include: utils/assert_user.yml user_name={{ user_name_2 }} user_host=localhost priv=SELECT
- include: remove_user.yml user_name={{user_name_2}} user_password={{ user_password_2 }}
- include: utils/remove_user.yml user_name={{ user_name_2 }}
- include: assert_no_user.yml user_name={{user_name_2}}
- include: utils/assert_no_user.yml user_name={{ user_name_2 }}
# ============================================================
# Assert user has access to multiple databases
#
- name: give users access to multiple databases
- name: Give users access to multiple databases
mysql_user:
<<: *mysql_params
name: '{{ item[0] }}'
@ -151,34 +89,34 @@
append_privs: yes
password: '{{ user_password_1 }}'
with_nested:
- [ '{{ user_name_1 }}', '{{ user_name_2 }}']
- ['{{ user_name_1 }}', '{{ user_name_2 }}']
- "{{db_names}}"
- name: show grants access for user1 on multiple database
- name: Show grants access for user1 on multiple database
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ user_name_1 }}'@'localhost'\""
register: result
- name: assert grant access for user1 on multiple database
- name: Assert grant access for user1 on multiple database
assert:
that:
- "'{{ item }}' in result.stdout"
with_items: "{{db_names}}"
with_items: "{{ db_names }}"
- name: show grants access for user2 on multiple database
- name: Show grants access for user2 on multiple database
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ user_name_2 }}'@'localhost'\""
register: result
- name: assert grant access for user2 on multiple database
- name: Assert grant access for user2 on multiple database
assert:
that:
- "'{{ item }}' in result.stdout"
with_items: "{{db_names}}"
- include: remove_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- include: utils/remove_user.yml user_name={{ user_name_1 }}
- include: remove_user.yml user_name={{user_name_2}} user_password={{ user_password_1 }}
- include: utils/remove_user.yml user_name={{ user_name_2 }}
- name: give user access to database via wildcard
- name: Give user SELECT access to database via wildcard
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
@ -186,7 +124,7 @@
append_privs: yes
password: '{{ user_password_1 }}'
- name: show grants access for user1 on multiple database
- name: Show grants access for user1 on database via wildcard
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ user_name_1 }}'@'localhost'\""
register: result
@ -201,8 +139,8 @@
<<: *mysql_params
name: '{{ user_name_1 }}'
priv:
- unsuitable
- type
- unsuitable
- type
append_privs: yes
host_all: yes
password: '{{ user_password_1 }}'
@ -215,7 +153,7 @@
- result is failed
- result.msg is search('priv parameter must be str or dict')
- name: change user access to database via wildcard
- name: Change SELECT to INSERT for user access to database via wildcard
mysql_user:
<<: *mysql_params
name: '{{ user_name_1 }}'
@ -224,7 +162,7 @@
host_all: yes
password: '{{ user_password_1 }}'
- name: show grants access for user1 on multiple database
- name: Show grants access for user1 on database via wildcard
command: "{{ mysql_command }} -e \"SHOW GRANTS FOR '{{ user_name_1 }}'@'localhost'\""
register: result
@ -234,7 +172,7 @@
- "'%db' in result.stdout"
- "'INSERT' in result.stdout"
- include: remove_user.yml user_name={{user_name_1}} user_password={{ user_password_1 }}
- include: utils/remove_user.yml user_name={{user_name_1}}
# ============================================================
# Test plaintext and encrypted password scenarios.
@ -246,7 +184,7 @@
#
# FIXME: mariadb sql syntax for create/update user is not compatible
- include: test_user_plugin_auth.yml
when: install_type == 'mysql'
when: db_engine == 'mysql'
# ============================================================
# Assert create user with SELECT privileges, attempt to create database and update privileges to create database
@ -277,7 +215,7 @@
- include: test_priv_append.yml enable_check_mode=yes
# Tests for the TLS requires dictionary
- include: tls_requirements.yml
- include: test_tls_requirements.yml
- import_tasks: issue-29511.yaml
tags:

Some files were not shown because too many files have changed in this diff Show more