2.5 Plugin Environment support and Testcases for dellos6 modules (#34890)

* Dellos6_2.5_support

* cleanup

* Fix pep8

* fix waitfor

* fix_facts

* fix_assert
This commit is contained in:
abirami-n 2018-01-22 18:04:21 +05:30 committed by John R Barker
commit 775118aae2
24 changed files with 1017 additions and 147 deletions

View file

@ -12,7 +12,6 @@ ANSIBLE_METADATA = {'metadata_version': '1.1',
'status': ['preview'],
'supported_by': 'community'}
DOCUMENTATION = """
---
module: dellos6_command
@ -34,7 +33,7 @@ options:
configured provider. The resulting output from the command
is returned. If the I(wait_for) argument is provided, the
module is not returned until the condition is satisfied or
the number of I(retries) as expired.
the number of retries has expired.
required: true
wait_for:
description:
@ -45,6 +44,19 @@ options:
See examples.
required: false
default: null
version_added: "2.2"
match:
description:
- The I(match) argument is used in conjunction with the
I(wait_for) argument to specify the match policy. Valid
values are C(all) or C(any). If the value is set to C(all)
then all conditionals in the wait_for must be satisfied. If
the value is set to C(any) then only one of the values must be
satisfied.
required: false
default: all
choices: ['any', 'all']
version_added: "2.5"
retries:
description:
- Specifies the number of retries a command should be tried
@ -64,43 +76,30 @@ options:
"""
EXAMPLES = """
# Note: examples below use the following provider dict to handle
# transport and authentication to the node.
vars:
cli:
host: "{{ inventory_hostname }}"
username: admin
password: admin
transport: cli
tasks:
- name: run show version on remote devices
dellos6_command:
commands: show version
provider: "{{ cli }}"
- name: run show version on remote devices
dellos6_command:
commands: show version
- name: run show version and check to see if output contains Dell
dellos6_command:
commands: show version
wait_for: result[0] contains Dell
provider: "{{ cli }}"
- name: run show version and check to see if output contains Dell
dellos6_command:
commands: show version
wait_for: result[0] contains Dell
- name: run multiple commands on remote nodes
dellos6_command:
commands:
- show version
- show interfaces
provider: "{{ cli }}"
- name: run multiple commands on remote nodes
dellos6_command:
commands:
- show version
- show interfaces
- name: run multiple commands and evaluate the output
dellos6_command:
commands:
- show version
- show interfaces
wait_for:
- result[0] contains Dell
- result[1] contains Access
provider: "{{ cli }}"
- name: run multiple commands and evaluate the output
dellos6_command:
commands:
- show version
- show interfaces
wait_for:
- result[0] contains Dell
- result[1] contains Access
"""
RETURN = """
@ -109,19 +108,16 @@ stdout:
returned: always apart from low level errors (such as action plugin)
type: list
sample: ['...', '...']
stdout_lines:
description: The value of stdout split into a list
returned: always apart from low level errors (such as action plugin)
type: list
sample: [['...', '...'], ['...'], ['...']]
failed_conditions:
description: The list of conditionals that have failed
returned: failed
type: list
sample: ['...', '...']
warnings:
description: The list of warnings (if any) generated by module based on arguments
returned: always
@ -220,11 +216,11 @@ def main():
msg = 'One or more conditional statements have not be satisfied'
module.fail_json(msg=msg, failed_conditions=failed_conditions)
result = {
result.update({
'changed': False,
'stdout': responses,
'stdout_lines': list(to_lines(responses))
}
})
module.exit_json(**result)

View file

@ -12,7 +12,6 @@ ANSIBLE_METADATA = {'metadata_version': '1.1',
'status': ['preview'],
'supported_by': 'community'}
DOCUMENTATION = """
---
module: dellos6_config
@ -30,15 +29,17 @@ options:
description:
- The ordered set of commands that should be configured in the
section. The commands must be the exact same commands as found
in the device running-config. Note the configuration
command syntax as the device config parser automatically modifies some commands. This argument is mutually exclusive with I(src).
in the device running-config. Be sure to note the configuration
command syntax as some commands are automatically modified by the
device config parser. This argument is mutually exclusive with I(src).
required: false
default: null
aliases: ['commands']
parents:
description:
- The ordered set of parents that uniquely identify the section
the commands should be checked against. If you omit the parents argument, the commands are checked against the set of top
the commands should be checked against. If the parents argument
is omitted, the commands are checked against the set of top
level or global commands.
required: false
default: null
@ -47,8 +48,8 @@ options:
- Specifies the source path to the file that contains the configuration
or configuration template to load. The path to the source file can
either be the full path on the Ansible control host or a relative
path from the playbook or role root directory. This argument is mutually
exclusive with I(lines), I(parents).
path from the playbook or role root directory. This argument is
mutually exclusive with I(lines).
required: false
default: null
before:
@ -63,19 +64,20 @@ options:
after:
description:
- The ordered set of commands to append to the end of the command
stack if a change needs to be made. As with I(before), the playbook designer can use this to append a set of commands to be
stack if a change needs to be made. Just like with I(before) this
allows the playbook designer to append a set of commands to be
executed after the command set.
required: false
default: null
match:
description:
- Instructs the module on the way to perform the matching of
the set of commands against the current device config. If you set
match to I(line), commands match line by line. If you set
match to I(strict), command lines matched by respect
to position. If you set match to I(exact), command lines
must be an equal match. Finally, if you set match to I(none), the
module does not attempt to compare the source configuration with
the set of commands against the current device config. If
match is set to I(line), commands are matched line by line. If
match is set to I(strict), command lines are matched with respect
to position. If match is set to I(exact), command lines
must be an equal match. Finally, if match is set to I(none), the
module will not attempt to compare the source configuration with
the running configuration on the remote device.
required: false
default: line
@ -83,9 +85,9 @@ options:
replace:
description:
- Instructs the module on the way to perform the configuration
on the device. If you set the replace argument to I(line), then
on the device. If the replace argument is set to I(line) then
the modified lines are pushed to the device in configuration
mode. If you set the replace argument to I(block) then the entire
mode. If the replace argument is set to I(block) then the entire
command block is pushed to the device in configuration mode if any
line is not correct.
required: false
@ -107,34 +109,36 @@ options:
description:
- The C(save) argument instructs the module to save the running-
config to the startup-config at the conclusion of the module
running. If you specify check mode, this argument is ignored.
running. If check mode is specified, this argument is ignored.
required: false
default: no
choices: ['yes', 'no']
config:
description:
- The playbook designer can use the C(config) argument to supply
the base configuration to be used to validate necessary configuration
changes. If you specify this argument, the module
does not download the running-config from the remote node.
- The module, by default, will connect to the remote device and
retrieve the current running-config to use as a base for comparing
against the contents of source. There are times when it is not
desirable to have the task get the current running-config for
every task in a playbook. The I(config) argument allows the
implementer to pass in the configuration to use as the base
config for comparison.
required: false
default: null
backup:
description:
- This argument causes the module to create a full backup of
- This argument will cause the module to create a full backup of
the current C(running-config) from the remote device before any
changes are made. The backup file is written to the C(backup)
folder in the playbook root directory. If the directory does not
exist, it is created.
required: false
default: no
choices: ['yes', 'no']
type: bool
"""
EXAMPLES = """
- dellos6_config:
lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
- dellos6_config:
lines:
@ -146,7 +150,6 @@ EXAMPLES = """
parents: ['ip access-list test']
before: ['no ip access-list test']
match: exact
provider: "{{ cli }}"
- dellos6_config:
lines:
@ -157,22 +160,21 @@ EXAMPLES = """
parents: ['ip access-list test']
before: ['no ip access-list test']
replace: block
provider: "{{ cli }}"
"""
RETURN = """
updates:
description: The set of commands pushed to the remote device.
returned: Always.
description: The set of commands that will be pushed to the remote device.
returned: always
type: list
sample: ['...', '...']
sample: ['interface Te1/0/1', 'no shutdown', 'exit']
responses:
description: The set of responses from issuing the commands on the device.
returned: When not check_mode.
commands:
description: The set of commands that will be pushed to the remote device
returned: always
type: list
sample: ['...', '...']
sample: ['interface Te1/0/1', 'no shutdown', 'exit']
saved:
description: Returns whether the configuration is saved to the startup
@ -185,7 +187,7 @@ backup_path:
description: The full path to the backup file
returned: when backup is yes
type: string
sample: /playbooks/ansible/backup/dellos6_config.2016-07-16@22:28:34
sample: /playbooks/ansible/backup/dellos6_config.2017-07-16@22:28:34
"""
from ansible.module_utils.basic import AnsibleModule
from ansible.module_utils.network.dellos6.dellos6 import get_config, get_sublevel_config, Dellos6NetworkConfig
@ -201,10 +203,23 @@ def get_candidate(module):
candidate.load(module.params['src'])
elif module.params['lines']:
parents = module.params['parents'] or list()
candidate.add(module.params['lines'], parents=parents)
commands = module.params['lines'][0]
if (isinstance(commands, dict)) and (isinstance(commands['command'], list)):
candidate.add(commands['command'], parents=parents)
elif (isinstance(commands, dict)) and (isinstance(commands['command'], str)):
candidate.add([commands['command']], parents=parents)
else:
candidate.add(module.params['lines'], parents=parents)
return candidate
def get_running_config(module):
contents = module.params['config']
if not contents:
contents = get_config(module)
return contents
def main():
argument_spec = dict(
@ -227,7 +242,6 @@ def main():
)
argument_spec.update(dellos6_argument_spec)
mutually_exclusive = [('lines', 'src'),
('parents', 'src')]
@ -245,42 +259,59 @@ def main():
result = dict(changed=False, saved=False, warnings=warnings)
candidate = get_candidate(module)
if match != 'none':
config = get_config(module)
config = Dellos6NetworkConfig(contents=config, indent=0)
if parents:
config = get_sublevel_config(config, module)
configobjs = candidate.difference(config, match=match, replace=replace)
else:
configobjs = candidate.items
if module.params['backup']:
if not module.check_mode:
result['__backup__'] = get_config(module)
commands = list()
if configobjs:
commands = dumps(configobjs, 'commands')
commands = commands.split('\n')
if any((module.params['lines'], module.params['src'])):
if match != 'none':
config = get_running_config(module)
config = Dellos6NetworkConfig(contents=config, indent=0)
if parents:
config = get_sublevel_config(config, module)
configobjs = candidate.difference(config, match=match, replace=replace)
else:
configobjs = candidate.items
if module.params['before']:
commands[:0] = module.params['before']
if configobjs:
commands = dumps(configobjs, 'commands')
if ((isinstance(module.params['lines'], list)) and
(isinstance(module.params['lines'][0], dict)) and
['prompt', 'answer'].issubset(module.params['lines'][0])):
cmd = {'command': commands,
'prompt': module.params['lines'][0]['prompt'],
'answer': module.params['lines'][0]['answer']}
commands = [module.jsonify(cmd)]
else:
commands = commands.split('\n')
if module.params['after']:
commands.extend(module.params['after'])
if module.params['before']:
commands[:0] = module.params['before']
if not module.check_mode and module.params['update'] == 'merge':
load_config(module, commands)
if module.params['after']:
commands.extend(module.params['after'])
if module.params['save']:
cmd = {'command': 'copy runing-config startup-config', 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'}
if not module.check_mode and module.params['update'] == 'merge':
load_config(module, commands)
result['changed'] = True
result['commands'] = commands
result['updates'] = commands
if module.params['save']:
result['changed'] = True
if not module.check_mode:
cmd = {'command': 'copy running-config startup-config',
'prompt': r'\(y/n\)$', 'answer': 'yes'}
run_commands(module, [cmd])
result['saved'] = True
else:
module.warn('Skipping command `copy running-config startup-config`'
'due to check_mode. Configuration not copied to '
'non-volatile storage')
result['changed'] = True
result['updates'] = commands
module.exit_json(**result)

View file

@ -23,16 +23,17 @@ description:
- Collects a base set of device facts from a remote device that
is running OS6. This module prepends all of the
base network fact keys with C(ansible_net_<fact>). The facts
module always collects a base set of facts from the device
module will always collect a base set of facts from the device
and can enable or disable collection of additional facts.
extends_documentation_fragment: dellos6
options:
gather_subset:
description:
- When specified, this argument restricts the facts collected
- When supplied, this argument will restrict the facts collected
to a given subset. Possible values for this argument include
all, hardware, config, and interfaces. You can specify a list of
values to include a larger subset. You can also use values with an initial M(!) to specify that a specific subset should
all, hardware, config, and interfaces. Can specify a list of
values to include a larger subset. Values can also be used
with an initial C(M(!)) to specify that a specific subset should
not be collected.
required: false
default: '!config'
@ -57,29 +58,29 @@ EXAMPLES = """
RETURN = """
ansible_net_gather_subset:
description: The list of fact subsets collected from the device.
returned: Always.
returned: always.
type: list
# default
ansible_net_model:
description: The model name returned from the device.
returned: Always.
returned: always.
type: str
ansible_net_serialnum:
description: The serial number of the remote device.
returned: Always.
returned: always.
type: str
ansible_net_version:
description: The operating system version running on the remote device.
returned: Always.
returned: always.
type: str
ansible_net_hostname:
description: The configured hostname of the device.
returned: Always.
returned: always.
type: string
ansible_net_image:
description: The image file that the device is running.
returned: Always
returned: always
type: string
# hardware
@ -147,7 +148,7 @@ class Default(FactsBase):
self.facts['serialnum'] = self.parse_serialnum(data)
self.facts['model'] = self.parse_model(data)
self.facts['image'] = self.parse_image(data)
hdata = self.responses[0]
hdata = self.responses[1]
self.facts['hostname'] = self.parse_hostname(hdata)
def parse_version(self, data):